QUESTION ON DIY TUBE AMP

Dear all (especially KK & Modi sir),

In case my transformer voltage output low if use bridge rectifier (full wave), if i use voltage double (2 diode & 2 cap) to increase the voltage suppy to the tube, it will be a halfwave, does this bring bring a lot negative effect to the sound quality?

ss

唔好意思，唔係好明！

Sorry modi sir my pc can't type chinese word...

my question is there any sound different if i use  the below method to obtain 100V for B+?

1) step down transformer (to 100V) after to through bridge rectifier

2) step down transformer =50v, but i use 2 diode& 2 cap to build a voltage doubler which will increase the voltage to >100V (but it will be a halfwave)

Half bridge, may be 50Hz fundmental freq. Lower redidation and harmonic affect to audio but you need a better filte cap to filter the unwanted ripple.

Post your circuit, I use TINA to help you simulate the result and resulatant Capacitor value.

TINA is a tools which developed by TEXAS INSTRUMENT.

Thank you KK sir,

This is the diagram.

my tansformer is AC 36V only, if use bridge can give only ~50V.

But use voltage double cn give 99Vdc then i can reduce it to 56v  or 60v with zener diode...