請教KK SIR如何摩我的CD

KK SIR,
傳上我的CD, SONY SCD XB790圖片，請教如何逐步摩。
1.換電容是否需換數值、耐壓相同的?BLACKGATE IS CHOICE?
2.OUTPUT 部份紅圈中是否CLOCK?
多謝先!

圖二

CLOCK連OUTPUT?

DSD蕊片

Why Sir,

Before answer your question, may I know something from you CDP first?

1. What is your CDP working voltage ? 220/110 V

2. How much of your budget?

3. What kind of "sound" you are looking for ?

4. Is it doing this modify by yourself or not ?

Please reply, I will ans your question ASAP.

KK.Ho

我哋又有機會學嘢la!!!

Dear KK Sir,

1. My CDP working voltage is 220V
2. My budget is under HKD4000
3. I like nearly all kind of music, especially in classic and vocal, so I prefer accurate sound.
4. I hope I can modify it by myself.

Thanks a lot!

$4000 budget:

$500 for TWO R-CORE transformer (Digital and Analog)

$100 for Fast recovery diode / Schottky diode

$1500-2000 for Black Gate capacitor (I don't know the exactly QTY)

$300-400 for output coupling capacitor (if your model is not using DC-SERVO out)

$400 for Op-amp (LPF, I-V conveter, etc)

$500 for OS-CON capacitor (Digital use)

$100 misc item like "copper paper, etc)

$ZERO for LED add-on.

No moeny la.............

$500-800 for replacing the resistor using in Opamp circuit
$500-800 for replacing the capacitor in Opamp circuit
$800 for Ultra Regulator (for analog opamp use)
$XX00 for Ultra Clock (design from KK.Ho,)
$XX00 for Discrete buffer out. (replace the generic op-amp circuit,)

Remark : $XX00  TBA later.......

Why Sir,
Which part you are doing first?

KK.Ho

Dear KK SIR

I'm going to modify my CDP as follow steps,
first, replace two C Code transformers
secon, replace couplin capacitors in analog output and other parts
          because I only use analog RCA output , Never use other output  
          terminel  such as coxial,opital, 5.1 Exit out,etc., so I think it is  
          unnecessary to replace all capacitors in output circuit.
Last, change the clock make by you, please quote me the price.

Thanks a lot.

KK SIR,

I think I've better to bring my CDP for you to comment.

MY Phone 90202622, email: whytewu@netvigator.com

Thanks.

Why Sir,

I need to check the date and place for your request, will let you know the result soon.

KK.

KK Sir ,

I know you are busy, but I realy hope you can check my CDP at your early convenient.

Looking from yours.

why, please check email on the date and place to meet.

See you soon!

昨晚，把自己部GG及CD抬到HIFI FEVER,結果滿載而歸!
最意外的收獲是發現自己部GG完全沒有噪音，比原子粒機都靜!原來噪音來自家中電源。
其次，親眼看到KK SIR神乎其技、三下五除二地把我CDP拆骨，眨眼功夫又全裝好。簡直表演魔術般! 不單如此：最後詳列大補藥方一紙，到“藥房”照撿，回家熬服是也!
相信，這次我部CDP不龍精虎猛才怪!

Why Sir,

Looking for your result soon!


KK.Ho

Dear K.K sir,
I have changed all the caps in analog regulator with Blackgate the day before yesterday except the one 25v 3300, because I can not find a blackgate in 25v 3300uf, I bought a 36v 4700uf to replace it but it is too big to be install.
Today, I will replace the caps in output part with Blackgate, since the saleman in KAI Wen told me that largest value of Silmic cap only is 0.01uf, not 0.047uf, I finaly bought Blackgate instead of it.
After finishing my first step, I found that the bass is a little more deep and tight. This made me quite exciting.
I can find C core at Kai Wen shop, If you know which shop sale good C core, please let me know.
Otherwise, I have a little over budget after first step. All Blackgate cost nearly $1500, detail as follow,
16v 3300uf X2 @135 $270
100V 470ufX3 @210 $630
25V 100uf X1 @68    $68
35 2200uf      @280  $280
25v 47uf X4   @16    $64 and 50V 10uf X2 @11 $22

Should be"I can not find C Core..."

K.K Sir,

Can I replace oringinal electrolytic caps with oil caps?I can not find 雲母caps. Is it a good choice to use oil caps or Blackgate elctrolytic?

Looking forward to your answer.

Thanks a lot!

K.K. Sir,
I finaly replaced the one 25V 3300uf with two 36V 2200uf. Although Blackgate have 16V3300uf, I am not sure whether I can replace 25v with 16V.
When can I take my CDP for your further comment  and guide me how to mod it next step.
Looking from yours.
Attach your proposal in output part since I can not send it to your HIFIFEVER Mail box.l

Why Sir,

My Email account have no problem, or you can send to my company account too.

For your CDP, your audio board which is using +/- 7V for Opamp, so you can use 16V BG cap.

For the Silver mica, please let me know what need to help you.

Call me at Tue night (day time not OK)

KK.Ho




[quote:9665d4cc20="why"]K.K. Sir,
I finaly replaced the one 25V 3300uf with two 36V 2200uf. Although Blackgate have 16V3300uf, I am not sure whether I can replace 25v with 16V.
When can I take my CDP for your further comment  and guide me how to mod it next step.
Looking from yours.
Attach your proposal in output part since I can not send it to your HIFIFEVER Mail box.l[/quote]