發了燒的鐘 / Burned Clock
Viewer 兄,剛剛再看清楚, 發現在 DB 104 上面有一條大裂痕. 煙就是從這裡走出來的. 這個鐘是幫同事買的, 攪成咁我都唔好意思收錢 ....:cry: alfcat,
yes, upon you photo,it is shorted with ic 7vuch04. alfcat,
yes, upon you photo,it is shorted with ic 7vuch04. Viewer 兄,
What is wrong with the PCB? Did the shop owner soldered the wrong direction or .... alfcat.
look like nowrong with the PCB and the shop owner have no soldered the wrong direction or. just shorted the IC only. So I can go back and ask for a replacement for the IC and then replace it and give it to my friend no problem? i think viewer is right, just change the IC should be working... It is strange. I don't understand WHY the chip blows in the first place. I connect 12V AC to the clock, I immediately see smoke / fumes coming out of it .... your first cap 470/16V is too low or max. V
do the math, 12V x 1.41=? cat sir
如果你個C|ock是買成品,應該有得換,錯不在你.
如果你焊都可以拿個C|ock或打電話問. Oh ... I bought this toy as a "finished product". The seller replaced the cap for me already.
I don't know Electronics at all ... ha..ha.. I am an Economist, not an Electronist ....
頁:
[1]