KK : 點解會咁架 (Clone ProAC 2.5 problem)
如圖Re: KK : 點解會咁架
叫左你吾好去其他DIY鋪買架啦, 貪平吾知俾D乜野過你等我一陣啦
KK.Ho 我塊唔係咁架! :shock:
o的電感唔知幾多, 但係從size判斷, 同你個circuit o既 value 成比例
可唔可以全部幫我執執佢 :lol: HIFIFEVER 優質服務, 雖然吾係係我哋工作坊砌, 為了DIY精神, 無所謂嗱
Capacitor:
UCC
Solen
Jensen
Resistor
RMG
Inductor:
Solen
Copper foil
Admin will quote the price to you, please check email.
Try to use it back your PCB.
KK.Ho 啱啱再check 過個分音器, 本身個layout係放你個circuit, 但係我而家o個塊俾佢硬改, 例如鑽多兩個hole加電容, cut 斷一部份circuit,... :cry:
你個高音circuit 係串 5ohm, 而家俾佢改咗 6.8ohm, 攪到個高d聲又尖又窄, 尼龍結他變咗綱線結他 :evil:
低音o個邊串少個47ohm, 攬到個底音好誇, 無晒分析力 :x 我見到另一個circuit, 主要係用幾個E6 series value o既 cap去砌夠個cap value. 咁做對音色有無影響? :shock: Booda,
Adding the subject in your subject to make it clearly. 幾時可以報番個價俾我, 等我今個禮拜攪掂佢 :lol: KK, 唔該幫我執執下面d parts: :lol:
0.25mh x2
0.83mh x2
1.50mh x2
10ohm (5W) x4
47ohm (5W) x4
0.1uf x2
0.68uf x2
3.3uf x4
4.7uf x4 結果:
KK 教落, 攞個分音器出o黎, 試啱先放番入去. :lol: 完成, 入箱 :P Booda,
Take out the "wave cloth" , it will make poor sound compare with "white and yellow " one.
KK.HO I use the "wave cloth" to block the fibre from the white and yellow cushion which is used in the bottom half of the speaker.
呢隻吸音棉真係好大鑊, 唔袛痕, 基本上係針拮咁痛. 手臂, 腳面都中咗招, 出一粒粒紅晒 :evil:
而家隻箱入面有三種吸音棉. 黑色波浪, 白黃痕身同白色cheap o野.:D
最後都係無買到1.8mh個coil, 因為太貴. 用番1.5mh算數.8)
tweeter 用反相接, 不過d結他聲都係無乜, 唔知係唔係未煲夠有關? :?:
老婆都話d聲好過以前, 得閒換埋個喇叭線叉頭同埋個jumper就大功告成 :lol: Booda
呢隻吸音棉吾知你是否還留在音箱內.是否完廠跟來.
呢隻吸音棉真係好大鑊, 唔袛痕, 基本上係針拮咁痛. 手臂, 腳面都中咗招, 出一粒粒紅晒 :evil:
Booda
呢隻吸音棉吾知你是否還留在音箱內.是否完廠跟來.
呢隻吸音棉o係鴨記買. 仲有兩包未用完 :lol:
頁:
[1]