找回密碼
 註冊
123
返回列表 發新帖
樓主: why

Shan Ling CD300

  [複製鏈接]
garyng2228 發表於 2006-10-2 08:40:01 | 顯示全部樓層

cd300 user

dear mr chen

i am interest to modify the  cd300 as well, can you help me

contact 96273999
chan000 發表於 2006-10-2 11:09:50 | 顯示全部樓層
sure!
SSWONG 發表於 2006-10-2 16:44:37 | 顯示全部樓層
Dualxeon or other shi fu,

May i know how the led green light can affect the sound quality?
faisir 發表於 2006-10-14 00:40:58 | 顯示全部樓層
陳先生,本星期曰(15)中午12點得閒嗎?期侍CD機又升級了!
chan000 發表於 2006-10-14 10:23:02 | 顯示全部樓層
faisir
OK,no problem.I will call you today for details.
faisir 發表於 2006-10-14 12:24:05 | 顯示全部樓層
Thankyou!!
 樓主| why 發表於 2006-10-17 17:48:20 | 顯示全部樓層

Surprise to the performance of my cd player

我的CD300摩改後,音樂通透、悠揚、甜絲的感覺,陣陣滲出,沁人心扉。更不用說那離箱、音場定位的表現了。當然,這也有TELEFUND 6922的功勞。
Jensen銅管銅膜電容,配合膽機(TELEFUND 6922),產生的威力,使我有:已有此機,夫复何求的感嘆!
套句陳煐光的俗語:可聽過世的機子。雖然夸張些,但從此覺得“一分錢一分貨”,不可儘信也。
本人設備:
CD: shanling CD300 OP cap replace with Jensen copper foil $6000+1400
PRE amp: Image 7A $3700+$500(Philip 5AR4)+$450(Telef 6922)
Pwr amp: MF A308CR Snd hand $9000
Cable: CdP&gtRE  Schuman XLR>RCA $760
           PRE&gtWR Delta A99 RCA        $1000
Pwr Cable: CDP 古仔      $220
                 Pre  Schuman  $750
                 Pwr amp: 古仔 $550
Total24330
chan000 發表於 2006-10-19 00:14:19 | 顯示全部樓層
why兄
恭喜你又進一階!
teiki-arii 發表於 2006-10-21 00:51:38 | 顯示全部樓層
Hi everybody,
I didn't read everything but the PCM1794 looks like the PCM1792, same characteristics than in my Cayin CDT-17A.
So it is a real symetric scheme according to the specifications of the PCM. You have one PCM per channel. You have also from PCM to RCA output, for each channel:
- 4 X monochips AD847 I/V Section Op Amps.
- 2 X monochips Differential Section Op Amps: it looks like OPA627...
- 1 X monochip single-ended RCA Op Amp: to convert from XLR to RCA. I can't read but it looks like OPA627 as well.

NB:
Firstable, OPA637 can't be used in this CDP. OPA627BP are quite better than OPA627AP. Try to change AD847 by OPA627 in I/V section.
If you use only RCA output, take off the last (single-ended) OPA AND the RIGHT OPA of each channel on differential section (when you look at PCB from PCM to RCA output). So you keep only the Four OPA in I/V Section and the LEFT one on Differential Section. So you use only one "half-PCM", but you might be astonished...
If you use only XLR output, take off only the last OPA (single-ended) for each channel. You don't need them for output XLR. IMHO, the XLR (symetric) output should be much better than RCA output (asymetric=not symetric).
About the Tubes:
First hypothesis: each tube works for RCA OR XLR output: try to listen to the music without tube by RCA. If it works, then RCA doesn't need tube, and then tube is for XLR output. If it doesn't work with RCA but without tube, then the tube works for RCA output.
Second hypothesis: each tube works for both (RCA AND XLR) output. It means actually that half tube is used for RCA AND XLR output tube at the same time.
Actually, I think that tube works for XLR OR RCA output. So one kind of Output doesn't need the tube.
And to conclude, the best tube I have ever tried in my Cayin CDT-17A is Mullard E188CC "shield" BVA gold pins. But I have to try Siemens CCa "grey plates", RTC E188CC and AEG E88CC...
Here is a link of my tweaked Cayin CDT-17A:
http://www.homecinema-fr.com/forum/viewtopic.php?t=29777877&postdays=0&postorder=asc&start=0

NB2:
I tried discret AOP, superclock from Bursonaudio. They are far better than OPA627.



I hope that my reply will help you.
Best regards,
teiki arii.
ewcl 發表於 2007-3-3 14:53:51 | 顯示全部樓層
very good price in this price range. :
ewcl 發表於 2007-3-10 19:12:27 | 顯示全部樓層
[quote:dc7896b373="ewcl"]very good price in this price range. :[/quote]

陳生好很幫人, 抵錫
chan000 發表於 2007-3-10 23:19:53 | 顯示全部樓層
ewcl兄
你有好多貴機,有機會再家訪!
wongmb 發表於 2007-3-11 22:04:30 | 顯示全部樓層
Does anyone know if the RCA output does/does not utilize tube and OPA627 ? My pre-amp does not have xlr input so I am stuck with rca output only.
If XLR is indeed superior than RCA, I guess I can use the Cardas XLR-RCA adapter ?? Anyone use those and recommend it ? I prefer to keep signal as simple as possible (i.e no adapter in between)

Mr Chan:
Is your XLR-RCA interconnect a complete DIY ? It says Schumann series on the jacket ?

I am a newbie and I dont know how to type in Cantonese.  
chan000 發表於 2007-3-11 23:20:53 | 顯示全部樓層
wongmb
You can use the schumann XLRtoRCA cable. It is the best and direct way. the cable body is come from US and solder the terminals in HK.If you want to try,just call me 94206363.It is free of charge for trail.
Mr Chan
ewcl 發表於 2007-3-12 09:00:24 | 顯示全部樓層
[quote:c8078d870d="chan000"]ewcl兄
你有好多貴機,有機會再家訪![/quote]

隨時歡迎 :
ewcl 發表於 2007-3-12 10:29:35 | 顯示全部樓層
[quote:dff9899518="ewcl"][quote:dff9899518="chan000"]ewcl兄
你有好多貴機,有機會再家訪![/quote]

隨時歡迎 , 今期試緊Audio Aero Prima cd player:[/quote]
wongmb 發表於 2007-3-14 20:07:54 | 顯示全部樓層
I compare the spec on the CD300 to the T-80 and the T80 actually has better spec ???
                               CD300            T-80
THD                         0.05%             0.003%
Dynamic Range        100db              115db
S/N ratio                  105db              115db

Does it mean that the T-80 is actually better and for less ??

I thought those are important numbers that dictate how a cdp sounds.

Any thoughts ?
jaspert 發表於 2007-6-24 19:51:04 | 顯示全部樓層
Hi Chan Sir,

I'm new to the forum and i don't have XLR input on my Musical Fidelity integrated  amp. After reading this thread,  i'm interested in your hand made XLR to RCA Schumann Seriess cable at 1.0 m length.

regards,
Jasper
Melbourne, Australia
Ferragamo2000 發表於 2011-12-12 00:17:45 | 顯示全部樓層
現在先嚟玩Shan Ling CD300...會唔會out咗呢.....?
martin88 發表於 2011-12-12 00:48:49 | 顯示全部樓層
用黎聽歌都冇話out唔out,就好次仲有好多人玩LP一樣,最重要就是啱聽啱用就得啦.
Halook 發表於 2011-12-13 18:59:36 | 顯示全部樓層
回復 119# Ferragamo2000


    師兄,呢條thread四年前有多啦!
您需要登錄後才可以回帖 登錄 | 註冊

本版積分規則

GMT+8, 2019-1-18 13:06 , Processed in 0.032247 second(s), 19 queries , Gzip On.

© 2001-2011 Powered by Discuz! X3.2. Theme By Yeei!

快速回復 返回頂部 返回列表