CD 電源線改裝 DIY

CD 電源線改裝 DIY

HI WILLIAM,
WHAT HAPPEN SOUND BEFORE AND AFTER?
PLEASE TELL ME, BECAUSE I WOULD TRY.

點解唔加一個電源插座呢？ :?:

各位師兄,
請問電源線,訊源線,喇叭線,那一樣最影響,
先投資那一樣?

[quote:e35794d04e="adam333"]各位師兄,
請問電源線,訊源線,喇叭線,那一樣最影響,
先投資那一樣?[/quote]


如果真是要計線材，那就是電源了，但其實要很多的配合！

adam333, I have not tested the player befor changing the cable so I do not know the effect.

modi, it is not easy to open the square hole at the back ma.. so it is the most lazy way to change the cable.. hee

I'll say 訊源線;喇叭線and the lease is 電源線。


[quote:15db9e70e2="adam333"]各位師兄,
請問電源線,訊源線,喇叭線,那一樣最影響,
先投資那一樣?[/quote]

My experience is - speaker cable -> interconnect -> power cord

各位師兄,
我有一台古董cd player"kyocera DA-710CX"
沒有OPTICAL OUT PUT,只有 RCA,COAXIAL,
我想改讀碟光頭,OUT PUT IC,改靚聲,請問大家高見,
THX A LOT!!!!!!

My experience say power cord the speaker cable the interconect.
My DIY power cord give much impact.... compare to my DIY CAT 5  speaker cable....

反正都換點解唔換隻靚牛.

Another suggestion, since the changer the power cable, better attached with an IEC male cord so that you can try/test on different type of power cord instead of using 1 fixer cable.

Besides, twisting some of the cable inside also may reduce noise and bring some good effect.