找回密碼
 註冊
12
返回列表 發新帖
樓主: admin

2008 7月-12月 第5項課程召集 - (5) CDPRO2 CD 轉盤製作班 (10月4日繼續組裝)

[複製鏈接]
ricky42c 發表於 2008-8-4 16:07:59 | 顯示全部樓層
Dear William,

我都要大箱~

Thanks!
DYNA
autumnleaf 發表於 2008-8-4 20:54:08 | 顯示全部樓層
Dear KK,

I have attended the open-day on 2 AUG and I had a thoughrough discussion with KK sir about my special interest in CDPRO2 project.

Since I have strong intention in making an integrated CD player using CDPRO2 (including digital in/out capability) rather than a pure transport. Personally I dislike SPDIF. I prefer the system clock being derived from DAC side, that should being known as least jitter.

I would use close distance I2S for data transmission between CDPRO2 and DAC, I2S also benefit to future expansion like DSP upsampling.

I express my vision in this project here and hope that KK sir can kindly support me on implementing my ambitous CD player.

After investigating the big chassis on open-day, I suspect whether this sexy metronorm a-like chassis have enough 實用面積 for my need. But anyway I still like to reserve this big chassis for this project.
kk_ho 發表於 2008-8-4 22:16:38 | 顯示全部樓層
May I know what kind of DAC you are looking for integrated with Pro2 ?
autumnleaf 發表於 2008-8-4 23:40:13 | 顯示全部樓層
Most modern DAC like BB, ADI, Crystal use same I2S bus so I don't think swapping DAC's is an issue. I have PCM63PK, PCM1702PK, PCM1792 right now. The very first is to craft the system architect, incorporating all the basic elements (transport, digital filter, clock system, DAC, LPF). This is really an extreme experimental project.

I wish to build a flexible system that the elements can be interchangable, like swapping DAC, digital filter, output stage. The goal is to build a CD player that is absolutely neutral and rich in information. And beat down my current CD player (Meridian G08).

I don't like tube output at the CD front-end. I prefer solid state that pertains all the information from source rather than round-off.

If I got all the datasheet of the IC's including CDPRO2 loader, this would help a lot in formulating feasibility of the whole system.
kk_ho 發表於 2008-8-5 00:14:00 | 顯示全部樓層
Because I want to know your DAC type and check the space can enough to place or not.
autumnleaf 發表於 2008-8-5 00:31:01 | 顯示全部樓層
I may use PCM1702PK at the beginning. I got NPC5802 as well. I wish the CDPRO2 clock being fed from DAC side. But I don't have CDPRO2 data at this moment that is a constraint to me on system development.

I also worry the space in chassis. Or I need a more bigger chassis?
autumnleaf 發表於 2008-8-5 13:53:19 | 顯示全部樓層
Dear KK,

I just bank in deposit for the DAC course and would like to reserve DAC1955 package. If not enough chassis space, seperate chassis is still Ok. But the clock channel between two chassis needs discussion.

Thank you very much indeed,

autumnleafcat.
 樓主| admin 發表於 2008-8-5 18:00:15 | 顯示全部樓層
bbleung, thx for joining
 樓主| admin 發表於 2008-8-5 18:24:58 | 顯示全部樓層
autumnleafcat, thx for joining
tonywang 發表於 2008-8-5 22:49:05 | 顯示全部樓層
我都要大箱吧
bbleung 發表於 2008-8-6 01:06:26 | 顯示全部樓層
Tks Admin,
Also prefer big case for the cd pro2, tks!
edmond1866 發表於 2008-8-6 19:47:36 | 顯示全部樓層
Hi Admin,

I have done some basic soldering before, but nothing advance.
Am I suitable to attend this class?

Thanks a lot
Edmond1866
adamcyc 發表於 2008-8-7 01:06:57 | 顯示全部樓層
HI
我己經付款了,
admin please check!
I want CDM9 Small case

Thanks
Adamcyc
 樓主| admin 發表於 2008-8-7 10:40:17 | 顯示全部樓層
adamcyc thx for joining
classicyip 發表於 2008-8-8 10:53:17 | 顯示全部樓層

cdpro2

dear admin
i have just deposit 1000 to HSBC acc.
classicyip 發表於 2008-8-9 21:43:18 | 顯示全部樓層
dear admin

i want CDPRO2, 大箱, 終極版 pls
ricky42c 發表於 2008-8-9 22:49:27 | 顯示全部樓層
KK sir ,

我想問可否在第一堂先決定要Upgrade可以嗎?(終極版之類)
但大箱我已cfm.

THANKS!!!
DYNA
ttzo 發表於 2008-8-10 01:42:16 | 顯示全部樓層
I want a CDM9 & large chasis.  Thanks.
 樓主| admin 發表於 2008-8-12 23:27:57 | 顯示全部樓層
classicyip thx for joining!
 樓主| admin 發表於 2008-8-27 14:34:25 | 顯示全部樓層
謝謝大家參與CDM9/CDPRO2 CD 轉盤製作班,
30/8正式開始, 請在下午2:30pm 到 荃灣沙咀道29-35號科技中心9樓910室

Map: http://www.hififever.com/forum/files/thumbs/t_hff-map_196.jpg

CDM9學員請帶同尾數 $2980 現金或支票取套件
Cdpro2學員請尾數 $4680現金或支票取套件
升級零件可在場決定

到時見
HiFi Fever
zi-bet 發表於 2008-9-11 03:56:57 | 顯示全部樓層
CDM-9/CDPRO2 CD .
音響線材製作班
隔離牛製作班
HOW MUCH FOR COURSE?
kk_ho 發表於 2008-9-11 09:44:02 | 顯示全部樓層
Zero,

All starting now, for the price, you can refer of the front page.
ricky42c 發表於 2008-9-15 23:16:09 | 顯示全部樓層
KK SIR~

請問我測完我快版有無大問題?
別外問下下一堂係邊日?

Thanks!
DYNA
kk_ho 發表於 2008-9-16 11:39:18 | 顯示全部樓層
All,

I am receive 6 board right now, 2 board are fail.

1. Wrong connection of the Schottky diode.
2. Not soldering the resistor of LT1085. Also, soldering wrong location of LM317 and LT1085.

I would like to collect all people board first and let all people complete at SAME day.

So, I need the feedback from other 4 people.
ricky42c 發表於 2008-9-25 23:16:36 | 顯示全部樓層
KK sir~

幾時再續前缘?下半塲何時開波?

THANKS!
DYNA~
autumnleaf 發表於 2008-9-26 02:47:44 | 顯示全部樓層
等D人做好個DAC先...
 樓主| admin 發表於 2008-9-26 14:06:47 | 顯示全部樓層
星期三再收了1套板, 還有3-4位未交未試..

給大家多一個星期焊接, kk 多一個星期測試, 10月4日才繼續上課 , 完成焊接請電郵給我安排交收測試

還有如想Upgrade底部銅板的請看電郵和回覆
autumnleaf 發表於 2008-9-27 04:28:35 | 顯示全部樓層
KK sir,

Is it totally 32 pieces of 47uF/16V OS-CON?

I miss the 22u OS-CON (C62), 100R (R310).
schmike 發表於 2008-9-27 08:44:43 | 顯示全部樓層
http://shop.hifidiy.net/product/170.htm
如果個case可以改到係咁上下就好喇
因為好似外露唔係咁好
希望kit sir可以諗諗再攪多班~~~
hehee
kk_ho 發表於 2008-9-27 10:43:15 | 顯示全部樓層
[quote:4d204b13f1="schmike"]http://shop.hifidiy.net/product/170.htm
如果個case可以改到係咁上下就好喇
因為好似外露唔係咁好
希望kit sir可以諗諗再攪多班~~~
hehee[/quote]

We have investigate this case, have some problem on the design, I can show you why

And.......

kit sir not my nick name..... he should be 007
I am KK Sir.

Don't mix. We are difference.
autumnleaf 發表於 2008-9-27 12:32:48 | 顯示全部樓層
KK sir,

Just finish soldering CDPRO2 PCB, missing 22uF (C62) and 100R at SPDIF output. But still OK for testing. How I can send you the PCB?
kk_ho 發表於 2008-9-27 15:20:52 | 顯示全部樓層
All,

9月13日或20日 - 提交已完成的電源板家課到HiFi Fever (大家可在兩天中任何一天2:30-7:00pm任何時間到來交家課, 但不會上課)
kk_ho 發表於 2008-9-27 17:51:37 | 顯示全部樓層
PASS LIST
Adam CYC
Tony Wang
DYNA
MR.Chu
Kenneth Lam
BBLEUNG
JACK YIP
autumnleafcat
TTZO

FAIL LIST (updated 30-SEP)
ERIC LEUNG (You have short circuit of the OS-CON Cap group)
9.9N銅 (Wrong soldering of all diode with reverse direction, not complete the soldering job of major capacitors, LM317T, please contact  admin to pick it up)

Not receive board list:

For the fail / no show people, please send a email to admin to arrange the madeup class before the lesson 2.
autumnleaf 發表於 2008-9-27 18:51:41 | 顯示全部樓層
Have sent email to William. Board ready for test at any time.
ttzo 發表於 2008-9-29 13:38:18 | 顯示全部樓層
K. K. Sir,

When I can join the make up class for correction of the wrong direction of all diodes.
schmike 發表於 2008-9-30 20:39:09 | 顯示全部樓層
[/quote]
We have investigate this case, have some problem on the design, I can show you why

And.......

kit sir not my nick name..... he should be 007
I am KK Sir.

Don't mix. We are difference.[/quote]
SORRY~
叫錯名~~~
希望可以減減價啦~~~
hehehe~~
ricky42c 發表於 2008-10-1 10:55:55 | 顯示全部樓層
Hi William, KK sir

問一問機箱到貨未?

心急人上
DYNA
tonywang 發表於 2008-10-2 23:36:35 | 顯示全部樓層
KK Sir ,

這星期六是最後一堂嗎 ?

是否需要付尾數 ?

能電郵確認一下餘額嗎 ?

Regards ,

Tony
 樓主| admin 發表於 2008-10-3 00:16:41 | 顯示全部樓層
I will send email to you all to confirm tomorrow, hope no typhoon la..
 樓主| admin 發表於 2008-10-3 14:29:18 | 顯示全部樓層
CDM9/CDPRO2 機箱組裝

明天 4/10/2008 (2:30pm) 開始
如還未給Power Supply PCB我們測試的請在11:00am到來先完成測試

明天請付尾數(現金或支票), 如有問題請電郵給我們
adamcyc $1030
dyna $3560
ttzo $3560
Tonywang $3560- $200 dac case = $3360
classicyip $3560
9.9N $4110
bbleung $3560
keith $3640
autumnleafcat $4190 -I2S module =  $3640
Mr chu $5790
Eric leung $4240
kk_ho 發表於 2008-10-8 23:15:23 | 顯示全部樓層
GOLDMUND ゴールドムンド MIMESIS SR CDプレーヤー CDM9 PRO搭載

GOLDMUND ゴールドムンド MIMESIS SR CD。
定価1,029,000円(税込)のモデルです。

1998年7月発売の商品で、上位モデルのMimesis 36A+トランスポートの性能を凝縮して製作されており、
メカニズム部分は、上位モデルを継承し、PHILIPSのCDM9PROが搭載されており、圧倒的な性能を持っています。

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有帳號?註冊

x
您需要登錄後才可以回帖 登錄 | 註冊

本版積分規則

GMT+8, 2024-3-29 01:02 , Processed in 0.039075 second(s), 19 queries , Gzip On.

© 2001-2011 Powered by Discuz! X3.2. Theme By Yeei!

快速回復 返回頂部 返回列表