返回列表 發新帖
樓主: admin

特別課程召集 - CDM-X CD 轉盤製作班 (只限CD理論/DAC課程學員) - 已完結

accphoto 發表於 2008-5-9 13:07:56 | 顯示全部樓層
Hi, William,

Did you get my large case yet ? Otherwise, i do not know what to do.
kk_ho 發表於 2008-5-16 12:23:47 | 顯示全部樓層
AP and all,

Please let me know you need Canare RCA socket or Canare XLR socket.

SMS to me...............

Chicken Sir.
leonlau 發表於 2008-5-16 12:44:51 | 顯示全部樓層
I want Canare RCA socket.  BTW, I don't have your mobile no. yet and so can't SMS you.  Hope you can see this reply before leaving.

See you tomorrow.

samuelsum 發表於 2008-5-18 14:18:19 | 顯示全部樓層
估唔到, 真係好復雜, 好多o野搞...  

過往, 小弟都好多時拎返屋企做, 今次就一樣都冇 - 所以都好慢下......

希望可以快o的完成啦 :!: 不過, 今次真係沒有kk的話, 個盤一定搞唔掂...做電子真係唔同 :

還有, 叔叔既出現, 使我在hififever鑽孔都順利好多哦

最後, 我見過幾位高手的cd機, 做得好鬼死靚, 我都要加把勁先得...  ops:

焊工好了一點點, 但又到金工是下一個目標; diy的路真難行, 但行得好有意思

謝謝kk + 叔叔
kk_ho 發表於 2008-5-20 00:26:15 | 顯示全部樓層
Photo of Supp class.


您需要 登錄 才可以下載或查看,沒有帳號?註冊

kk_ho 發表於 2008-5-20 00:35:39 | 顯示全部樓層


您需要 登錄 才可以下載或查看,沒有帳號?註冊

MB 發表於 2008-5-20 13:39:03 | 顯示全部樓層


KK Sir / Admin



andypoon 發表於 2008-5-22 13:39:41 | 顯示全部樓層
嘻! 終於完成了這部 CDM9 Transport! 雖然過程困難重重,多得 KK Sir 悉心指導和無限期加班,最終守得雲開見月明!

附上圖片說明,歡迎大家觀摩賜教 !



您需要 登錄 才可以下載或查看,沒有帳號?註冊

samuelsum 發表於 2008-5-25 01:29:22 | 顯示全部樓層
kk sir,

今日的加堂, 小弟終於完成了

遇到你依位阿sir, 小弟有時真係知講咩好 - 小弟返家剛沖完涼, 都成點幾, 但你仍然為幫同學們而努力

我們的辛苦, 都不及你的百分之一... 因為我們不斷為你製造難題, 你都不辭勞苦為大家挨

有好多時, 你講完一次, 大家都會繼續爆錯, 尤其小弟 ](*,) ; 真係好感激你

謝謝kk, 還有william和叔叔 (多謝多幾次都好應該)
bcheong 發表於 2008-5-25 02:37:46 | 顯示全部樓層
William / Kk,

How could you change the schedule in such short notice! I prepared all the schedule on Sunday and didn't noticed the change?!
andypoon 發表於 2008-5-26 14:23:27 | 顯示全部樓層
KK Sir,

請問終極版 upgrade 係唔係有 spare 鐳射頭附送? 何時可以攞呢?

kk_ho 發表於 2008-5-27 09:28:31 | 顯示全部樓層
Yes, we are remember this issue.

Please wait around at around end of June.
tommy2047 發表於 2008-5-27 10:34:21 | 顯示全部樓層
I share the same view as Sam-Sam.   KK sir is very helpful in solving our problems.   Because I need to leave earlier, he even  helps me to complete some soldering works.  thank KK sir.
leonlau 發表於 2008-5-27 12:03:34 | 顯示全部樓層
Special thanks to KK for guiding and helping me to finish my CDM9.  Just can't imagine a super DIY beginner like me can construct a CD transport by myself as this is my first usable electronic toy after I resumed back to use soldering iron 20+ years before.  Also thank you to 叔叔 for guiding me on the 金工 stuffs.

Frankly speaking, while already knew this workshop is not a simple plug and play one, it has more 金工 works than I expected.  However, this can also help me to rethink how to utilize alternate cases which we sometimes can't find a perfectly fit cases for our systems.
leonlau 發表於 2008-5-27 12:23:36 | 顯示全部樓層
Hi KK, I'd started to test the new toy for a while.  Just have a few questions as below:

1) After I changed the default clock to the external clock, I feel the bass is a little bit more solid and the sound seems a little bit more focus.  Is this the way the re-clock should work?  Or the difference should be more prominent?

2) For the first few tracks, the high turning speed make a quite audible high frequency noise together with the normal motor noise.  This high frequency noise gradually faded out after track 4-5.  Is this my CDM9's problem rather than a common issue and how should I fix it?

Many thks,
andypoon 發表於 2008-5-27 13:58:09 | 顯示全部樓層
Hi Leon,

Yes, the motor noise is quite audible when my CDM9 was played with the top cover opened (I am using the big case).  It was better when the cover was closed.  If you are using the small case, perhaps you have to make a cover for it.

vcelkamaja 發表於 2008-5-27 14:54:58 | 顯示全部樓層
Admin, hh_ko,

there some nice photos of CD player chassis / enclosures. Is it possible to buy them directly from you? I'm looking for some nice top loaded chassis for my CD ROM based CD player.

Please let me know.
Best regards,
cp301 發表於 2008-5-27 16:37:48 | 顯示全部樓層
I totally agree that KK Sir is very helpful. KK was even willing to help on my VT60SE while that day was allocated for other course. Really enjoy the DIY process with KK Sir guidance.

DIY is really creative by seeing so many different ways in assembling the CDM9 in the big case. Very nice work with copper base and support.

accphoto 發表於 2008-5-30 11:25:01 | 顯示全部樓層
Even though I have not finished my CDM Pro 9 yet ( I am the last one to order the large case so I have to wait..) , I am really amazed on the technical creativity of fitting a transport into a case, though a lot of metal work but I think I learn a lot from the course. Thanks for KK 's devotion to the course and toleration for our beginner 's fault.
mrsiu 發表於 2008-5-31 09:18:15 | 顯示全部樓層
請問有沒有人想賣出你的CD Transport ?
kk_ho 發表於 2008-5-31 18:34:16 | 顯示全部樓層
bbleung 發表於 2008-6-1 19:25:37 | 顯示全部樓層
得到KK Sir的特別安排下,終於能完成左部機。在這還是要特別多謝KK Sir在當晚抱病還幫忙我呢個新手攪好部機。真是萬分感激!多謝你,KK Sir。
今日聽左6個鐘左右,開始時聲有D硬,聽左個零鐘後休息左一陣,(沒有關機)食完野再聽,之前D生硬都明顯少左。整體表現明顯高左。但唯一還爭些少就係比較我自已聽開部機時部M9未夠清,(個人口味)相信去Ext Clock 條線和另外兩組換左銀線之後應該都會三級跳。
一於聽KK Sir 講,煲番兩佰個鐘後等KK Sir 部 Pro 2比較一下。
再次多謝KK Sir 呢幾次身體唔舒服都幫手完成左部機。亦多謝hififever各位大大做出呢D咁高水平Course!
modi 發表於 2008-6-1 19:57:20 | 顯示全部樓層
K.K.Sir:我還未完成啊! :cry: 你幾時補堂比我啊? :
andypoon 發表於 2008-6-1 20:59:13 | 顯示全部樓層
係呀! 我覺得DIY o既樂趣七成在於過程,三成在於成果噃。
classicyip 發表於 2008-6-8 22:50:08 | 顯示全部樓層

time for next cdpro course?

hi k ksir
when will another cd course be arranged,??
I am interested in it very much....
jastudio 發表於 2008-6-10 01:10:52 | 顯示全部樓層

Thankyou very much KK sir!!

First of all I want to thank you KK sir for his help. He came to the class even he got flu, and on the last day he stay over 1:00 AM(that was the time go home) to help us finish it and I think he stayed much longer because still some classmate haven't finished...from this, I think not many other DIY club can provide this kind of services with such great attitute!!

My CDM9 is still warming up, at first the sound feel a bit sharp and harsh (maybe because my caps) but the other day when I play the same CD it already sound much better, completely beat my grandpa cd player... a lot more detail but warm (who said old model cd transport cannot beat new cd transport model? in hifi world I believe new technology is not absolutly equal to better sound), the sound stage and image is more noticibly accurate.

Still, I am waiting for the up-sampling part to come out!! very look forward to it!

Thank you!

kk_ho 發表於 2008-6-11 01:56:24 | 顯示全部樓層

Re: Thankyou very much KK sir!!


You are performance upgrade type.

We will have simple show soon (before the ADV class)

Demo using 3 type.

Basic, performance, highend. (with CDPRO2 X CDM9 crossover)

Total 6 combination.

samuelsum 發表於 2008-6-12 22:02:32 | 顯示全部樓層

我個盤休息一個星期, 到今日得閒好似發脾氣

kk sir,


點知---我個盤休息一個星期, 到今日得閒好似發脾氣...

今日一開機, 佢話no disc(冇碟), 要re-start部機先load到

係咪我有咩做得唔好, 一話小弟屋企太光... 再試多幾次, 好似要搵o野擋住燈光先好返少少

一話個sensor傻下傻下; 點算 :?:  :!:

classicyip 發表於 2008-6-12 22:44:36 | 顯示全部樓層
hi kk sir
will there be another cdpro  assembly course in near future??
i am really interest in it.............
kk_ho 發表於 2008-6-13 11:12:16 | 顯示全部樓層

Re: 我個盤休息一個星期, 到今日得閒好似發脾氣

Please check your motor voltage wire. (4 pin cable)
kk_ho 發表於 2008-6-24 00:19:55 | 顯示全部樓層

Re: 我個盤休息一個星期, 到今日得閒好似發脾氣


MARANTZ マランツ 人気のトップローディング CDプレイヤー CD-23 (定価\200.000)です。
仕様は : 1ビーム・スウィングアーム CDM-9 Pro ... D/Aコンバータは、評判のビット・ストリーム DAC7
重厚なガラスの蓋 ...洒落たデザインにマランツのトップ技術が詰め込まれたCDプレーヤーです。


您需要 登錄 才可以下載或查看,沒有帳號?註冊

jbnl 發表於 2008-6-24 03:24:25 | 顯示全部樓層
Is it possible to buy a CDM9 Mech ?
Where can i buy it and what is the price ?
kk_ho 發表於 2008-6-24 10:55:33 | 顯示全部樓層
This product DOD la....

定価 200,000yen approx $14000 HK

Or you can join CDM9 course.
bbleung 發表於 2008-6-29 23:18:01 | 顯示全部樓層
KK Sir, 我部CDM9只能讀到9tracks,初時都冇注意。今日老板想聽一首歌,換左只CD後想播,點知冇左個只歌,揀來揀去都唔得。係咪有D地方要注意下!
kk_ho 發表於 2008-6-29 23:53:02 | 顯示全部樓層

Can you describe more clearly before I draw the comment.

bbleung 發表於 2008-6-30 01:40:23 | 顯示全部樓層
That means when its play the cd with totally 13 songs, its just show & max can play up to track 9, can't play anymore from track 10....change another cd with 11 tracks & its the same!
I've try to switch on & off few times but its display 9 songs in total & it also stop after finished playing track 9.
Don't hv the camera right now, m/b take some photos later.
kk_ho 發表於 2008-7-1 02:08:38 | 顯示全部樓層
1. you did not re-read the TOC

2. your sensor may be out of order.

Check 3 pin wire first.
timmywan 發表於 2008-11-27 17:43:57 | 顯示全部樓層
servotech 發表於 2008-12-14 22:45:03 | 顯示全部樓層
how can I join the workshop ???? very interested
kk_ho 發表於 2011-8-3 20:51:19 | 顯示全部樓層

請告訴我你CDM9 修理後仲有無事?

您需要登錄後才可以回帖 登錄 | 註冊


GMT+8, 2019-6-21 05:54 , Processed in 0.047711 second(s), 21 queries , Gzip On.

© 2001-2011 Powered by Discuz! X3.2. Theme By Yeei!

快速回復 返回頂部 返回列表