SP - 10 channel switch

As the construction of SP-10 is finished, I would like to go for the switch part for more INPUT and OUTPUT channels

May kind brothers continue to assist me? thanks
e.g.
where to buy the switch? what model?
and the connection method? any extra module needed for swtich part

Thanks


Regards,
MBCY

ops:

KK number again.

[quote:5ae0911689="audionote"]KK number again.[/quote]

haha
he / she (actually from the voice i think is a he) but brother audionote always type ? she ?  haha

he / she is busy at the moment, i dun want to disturb him / her
so if any other brothers have ideas, just feel free to instruct / teach me, i am glad to hear from all of your opinions

thank you again

She跟he有什麼分別.要是我打錯了.對不起

我英文不行.


除了他們.那裡來人合资格出聲.


對嗎?

[quote:88e6a03a41="audionote"]除了他們.那裡來人合资格出聲.


對嗎?[/quote]

haha, yes
but if any brother / sisters has learned the skills and would like to share
i am willing to listen

just discuss, no need to feel inferior
and this is the spirit of forum talking

  

Dear,

Remote type or non-remote type ?

KK.Ho (I am male type !)







[quote:52166fe0a3="mbcy"][quote:52166fe0a3="audionote"]除了他們.那裡來人合资格出聲.


對嗎?[/quote]

haha, yes
but if any brother / sisters has learned the skills and would like to share
i am willing to listen

just discuss, no need to feel inferior
and this is the spirit of forum talking

  [/quote]

[quote:f2b07a8082="kk_ho"]Dear,

Remote type or non-remote type ?

KK.Ho (I am male type !)







[quote:f2b07a8082="mbcy"][quote:f2b07a8082="audionote"]除了他們.那裡來人合资格出聲.


對嗎?[/quote]

haha, yes
but if any brother / sisters has learned the skills and would like to share
i am willing to listen

just discuss, no need to feel inferior
and this is the spirit of forum talking

  [/quote][/quote]

which one is more easy ? if remote that's cool!!

remote type if it is not difficult to make / materials easily available

thanks KK

I will forward your requirement to admin, he/she will contact you later.


KK.Ho

[quote:f88b3872f4="kk_ho"]I will forward your requirement to admin, he/she will contact you later.


KK.Ho[/quote]

Thanks KK~~~
:

mbcy

你部機開大聲時有噪音嗎?

完工後有否用微毫錶及視波器驗測.

信號平直嗎.

[quote:cec9bfed80="audionote"]mbcy

你部機開大聲時有噪音嗎?

完工後有否用微毫錶及視波器驗測.

信號平直嗎.[/quote]


I hardly hear any noise
as too busy recently, so no time to go up to hififever to test
hehe

mbcy兄

你真利害.
那麼多人在這裡說SP 10有噪音你還砌SP 10.
他們有問題也沒像你那麽快有幫助.
你連簡單接線也不會接.還說(好難聴在噪音).

你一定是砌機天才及跟他們有恃別關連.所以你說的說話也恃別關照他們.



註:請你們不要回覆.因為沒有人喜勸再看你們恃意安排的說話了.
















[quote:7516d97053="mbcy"][quote:7516d97053="audionote"]mbcy

你部機開大聲時有噪音嗎?

完工後有否用微毫錶及視波器驗測.

信號平直嗎.[/quote]


I hardly hear any noise
as too busy recently, so no time to go up to hififever to test
hehe[/quote]

[quote:c8c77e96a5="audionote"]mbcy兄

你真利害.
那麼多人在這裡說SP 10有噪音你還砌SP 10.
他們有問題也沒像你那麽快有幫助.
你連簡單接線也不會接.還說(好難聴在噪音).

你一定是砌機天才及跟他們有恃別關連.所以你說的說話也恃別關照他們.



註:請你們不要回覆.因為沒有人喜勸再看你們恃意安排的說話了.
















[quote:c8c77e96a5="mbcy"][quote:c8c77e96a5="audionote"]mbcy

你部機開大聲時有噪音嗎?

完工後有否用微毫錶及視波器驗測.

信號平直嗎.[/quote]


I hardly hear any noise
as too busy recently, so no time to go up to hififever to test
hehe[/quote][/quote]

u have misunderstand lar

actually i have history of making a EL34 tube amp not using PCB i.e. 搭棚in the past
but i have no experience in making using PCB
so i can finish it so fast

haha if i have special relationship with them
then may admin refund some of my paid cash ? haha

and till now, no one inform me how to make the sp-10 switch

i am still waiting for their instruction

audionote 兄 , you think too much.......

"請你們不要回覆.因為沒有人喜勸再看你們恃意安排的說話了"

That why I tell Admin PM you about the switch (input selector)

No talk, no noise
Talk too much, attack too much.

KK.Ho

MBCY,

Call me tonight.

Admin is busy this week.

Thanks
KK.Ho
9306XXXX

mcby,

Sorry, Yes, really busy these days....

For the switch you can buy a cheap one (several dollar) or good one (about $3xx) or use reply module (abour $200)

It is simple switch the signal in to volume.

Need to confirm which one you will use before we can explain more in details.

[quote:3d23ac6fa2="Admin"]mcby,

Sorry, Yes, really busy these days....

For the switch you can buy a cheap one (several dollar) or good one (about $3xx) or use reply module (abour $200)

It is simple switch the signal in to volume.

Need to confirm which one you will use before we can explain more in details.[/quote]


what is a reply module?

i would choose a good one if reply module is not good

besides the swtich for input selection

how to make another pair of output (RCA)?

Yes, good switch is better than relay, most high-end products use physical switch instead of relay

You can connect 4 pairs of RCA to the switch (input) and there is 1 output from the switch.

Different switch connection is different, you better ask the vendor for the details.

mbcy兄

要是我說錯對不起

但是你自己看看你的工藝那裡有人會相信.
你連做膽機最基本下地線也不會.還在吹牛說部機沒噪音及你從前做過機.





[quote:18dd9bfec6="mbcy"][quote:18dd9bfec6="audionote"]mbcy兄

你真利害.
那麼多人在這裡說SP 10有噪音你還砌SP 10.
他們有問題也沒像你那麽快有幫助.
你連簡單接線也不會接.還說(好難聴在噪音).

你一定是砌機天才及跟他們有恃別關連.所以你說的說話也恃別關照他們.



註:請你們不要回覆.因為沒有人喜勸再看你們恃意安排的說話了.
















[quote:18dd9bfec6="mbcy"][quote:18dd9bfec6="audionote"]mbcy

你部機開大聲時有噪音嗎?

完工後有否用微毫錶及視波器驗測.

信號平直嗎.[/quote]


I hardly hear any noise
as too busy recently, so no time to go up to hififever to test
hehe[/quote][/quote]

u have misunderstand lar

actually i have history of making a EL34 tube amp not using PCB i.e. 搭棚in the past
but i have no experience in making using PCB
so i can finish it so fast

haha if i have special relationship with them
then may admin refund some of my paid cash ? haha

and till now, no one inform me how to make the sp-10 switch

i am still waiting for their instruction

audionote 兄 , you think too much.......[/quote]

KK ho

要是我說錯對不起

你為什麼會說

No talk, no noise
你那樣說法不是跟 做多錯多.不做不錯. 一樣.
你在這裡不應該有這種說法.你一定是忘記自己在這裡身份是老師.應拿一點老師態度出來說話要像樣.


Talk too much, attack too much.
你又不是美國人時常去打恐佈分子跟他們不和.所以經常心裡想attack.
是否你也跟他們美國人一樣跟太多人不和.所以時常感覺有仇人attack.



看來你一定有妄想症.
你在這裡說話態度及心理上要調教一下.


註:我只是說不相信.你身份是老師態度應解說明白.這個連你學生mbcy兄也董.你不應該說以上對話去attack他人,要跟人過不去.












[quote:24787b8b4f="kk_ho"]"請你們不要回覆.因為沒有人喜勸再看你們恃意安排的說話了"

That why I tell Admin PM you about the switch (input selector)

No talk, no noise
Talk too much, attack too much.

KK.Ho[/quote]

yes, i really don't know how to make the ground thing
but modi has already told me the right way
and i have corrected it

my connection is different
i use teflon tubes with furutech speaker cables - copper inline (hair like) as RCA connections
every pair of IN and OUT, i twist as a pair as when i do my first tube amp
with the earth ground to the same pt
as in the past sby told me that could reduce noise

for the PCB ground, i have removed and use the brass stand as earth

so what then if i make the machine with no noise? is that offending you?
noise, i only trust my ears, i turn my SP-10 to the loudest volume , connecting to my power amp and speakers, and use my ears to judge whether there is noise

kk is good
but he is very busy recently, if he recall we have only one chance in the phone talking about cables connection actually

ok, back to you

why yelling and creating conflicts here
i am just a customer here, asking for help for making my amplifier
i have nothing against you, and as you could see admin only reply me yesterday asking me what way i would like to go for the switch

i really don't know why you have such great hostility towards them  (or me)
i don't know whether you all have any conflicts in the past
that's , to me, sound really strange
and i only know that i want help, that's it

my skills is not excellent, so what then? building the amp for listening is just my hobby, is it my job?, u pick all my photos here to judge me? esp at the LED part haha, i admit it is very poor in soldering at that part, so what then? would my boss deduct my salary because of that? remember, i diy for fun, not as my job. u say i am bull-shiting, as u like, u trust it, ok, u don't trust it, then u just let go and leave my post

hope you don't spoil my post, i am still seeking help at the input selection and output part

please, spare time on other meaningful things, and don't waste time here
that's not worth

and that's the last time i would reply you
if you continue to behave like that
admin please kill this post
and may admin use PM to tell me the way to make the switch and output part

and sorry to create troubles to all of you, KK, and admin

This kind of problem always happen in all DIY web (all of the world)

No problem la,

Actually, our aims is : Teaching every body and let he/she own their BEST performance DIY machine.


KK.Ho :wink:

MCBY,

If you have time, phone to me and take your machine to our office.

Let me and Modi take a look

KK.