Musical Fidelity X10-D變壓器問題

TIMW,

Your transformer specification should be 12V AC 1500mA output.

You cannot use DC output 電子牛500ma 至 1.5A.

Try to buy R-CORE 12V AC output la.
We have R-CORE transformer.

KK.

Please check size below:

Tailor made 1 pcs may be expensive.

I will try to do this "together" with DAC1955 transformer together.



KK.

又係呢D悲慘既事，牛係230V(英國)
但用係香港，輸出負載滿500mA頂多得番11V。

食吾飽難怪衰聲。

最後版本:
用C-CORE牛，比R-CORE更厲害，更毒
加上Softstart, IEC socket onboard, 零接線。
黑色型仔小机箱。
最重要:有FUSE(200mA)，水線。
今晚零晨會出圖。

12V及16V也是用C-CORE。
記住㷛完出報告

In progress.....

Fuse in the box...

Need M3 screw.....

請告訴規格，你的要求。KK_ho@Hififever.com
有Fuse, 水線。
用C-CORE牛
用好材料做的。

PM to you, please check the message box.

Steve138,

Please check PM to confirm your order.

Steve,

Completed one set for you.

FYI of internal connection, you can decide to go DIY or need me help.

Measuring parameter:
No Load standby power : 0.8W
Power on, no load power : 2.2W (Transformer idle loss).
Output Voltage : No load : 14.45V (Measuring at DC plug)
                        1000mA loading : 12.62V (Measuring at DC plug with load)

With Earth wire.
200mA Fuse. (inside the box, in Softstart module)
Output cable : 2 feet CAT6.

KK.

Steve,

13號星期六我有DAC班, 可上來取火牛

10:00AM to 6:00pm.

Suggest come at 1:00pm or later.

你先看看成品，你認為搞得掂我再執套套件俾你。
你方便就帶埋隻舊牛同副机現場比下分別，因還要處理相位問題。

Steve,

Power meter PC control program.

KK

Haloboy,

12V, 500mA output, may I know 12V is  DC or AC ?

I still have one set in hififever. (12V AC output type for Musical Fidelity X10.)

haloboy, please check PM.

Cutecute,

最後一隻俾haloboy 訂左，做緊比佢,如果佢放飛機吾要,會通知你問你要吾要。今個月超忙,要改三部機,所以吾接外order.

Cutecute,

最後一隻俾haloboy 訂左，做緊比佢,如果佢放飛機吾要,會通知你問你要吾要。今個月超忙,要改三部機,所以吾接外order.

Haloboy, 造好了, 七月九日下午二時後上來取.

Cutecute,

你個V-DAC 牛我上網看過, 是12V DC, 500mA

我己做好holoboy 果隻, 輪到你了.

你要我就做, 用UCC 超級穩壓加C Core 牛

Haoboy,

Completed, please PM me to arrange take it.
Give you 5 days, no reply will sell to next one.

KK.