CDPRO2 + AD1955 2 IN 1.

Specification:

CD PRO2 Module
Seperate power supply for CD PRO2 and DAC.
Power Sequencer for 5V and 9V.

AD1955 DAC section
IIS direct input from CDPRO2 (Sampling rate converter to 192KHz/24 bits)
USB input
SPDIF input (Coaxial)
SPDIF input (Optical)

430mm x 300mm x 70mm H.

Available at Sep-2010.

SE OR BAL CONFIG
如果閣下是真的沒有BAL PREAMP, 不要浪費錢砌FULL BAL.

因呢部野真係會幾然貴

建議你地先砌DAC 部份,果度最用得多時間,所以呢個課程會斬開三部份
DAC
CD MECH
FINAL ASSEMBLE

儲定錢吧

Assume Single End mode
Full RMG resistor (40 pcs)
BG capacitor over 30pcs
Jensen 4 pole capacitor x 2
OSCON over 30pcs
Schottky diode = 20pcs
AD1955 board
Upsampling board + USB codec
CDPRO2 mech
Chassics (This one is expensive, because I use over 3 month to study)
PSU for CDPRO2 x 2
R-CORE x 3
20 mm alum top plate. Smoth slider
LED array.
MCU board for CDPRO2.


Calculate la 麻手.....

全部surface mount 代焊

新版本吾然用呢果"壓"

Except Analog Device AD1955.

Another choice is TI PCM1794A.

富豪版: CDPRO2 + 終極零件(最終極的設定,無可能再有空間再摩改的設定)

半富豪版: CDPRO2 +極品零件(RMG, SILMIC CAP, 真LME49710)

玩住先版: CDM12.1 + 極品零件(RMG, SILMIC CAP, 真LME49710)

有全銅CDPRO2 托板 (即你見到黑色那塊部份供應)
重然到抬起行吾到十步
所以,Modi Sir 有部份和我一起教的
你們要期待啊