冬季DAC 解碼製作班 實況

To obtain a low ESR in traditional E.cap (cannot use OS-CON)

using the high voltage cap can do this.

Always found in Japan manufacturer model

KK.Ho (not at HK 2 week....   )

Cyrus,

PCB DAC:
. The IC provided is CS8414, but the R1 and C3 provided is 1K & 0.047u respectively, not the one highlighted in your powerpoint: CS8418 match with 470 and 0.068u

// We will change the correct value to you. Also for upgrade.

. The C11 value from my package is 0.6h (measured via a multimeter), not 470p as stated on the schematic.

// not understand your question, you can measure the 470pF using our equipment.

PCB IV2:
. R6 & R8 under Schematic is 10K, the value measured from my package is 20K

. C3 & C4 under Schematic is 220u, the value measured from my package and the component list stated is 47u.

// Please bring the components at next class


PCB Power:
. From the Schematic and PCB, there is a L1 mentioned, I found no L1 from my package.

// Admin will follow


PCB REV(R101)
. R2 - R5 under Schematic and the component list is 470, the value measured from my package is 270.
. I found no C3 1000uF from my package

// Admin will follow

Please bring it at 19-JAN.

Or, you can soldering what you have components into PCB first.

KK.HO

Tueday night is NOT OK.

Forget need to attend the wedding dinner.

WED is OK.

KK.

Space is reserved for PCM1798 DAC. Seperated R-CORE for PCM1798 and TDA1541A.

Dual DAC in the box.

DUAL CORE.

Coming soon !

KK.HO

Updated photo at 26-Jan.

Admin:
Forget to take some of the classmate, he is fully complete the unit.
Don't fire me....