希望您能夠繼續發揮DIY的互助精神,
大家互相交流經驗去更深入了解和改良我們的GG,
從DIY的過程中,有更多的得著,開心和樂趣。作者: derikchan 時間: 2006-1-16 10:02
Hi every brothers,
Let's see the power monster!!! Net weight 20LB!!!
Dual channel separate power supply!!作者: patten88 時間: 2006-1-16 12:26
點解見唔到膽. 分體? 幾時完工. 期待super GG 開聲.
brian作者: 匿名 時間: 2006-1-17 01:05
提示: 作者被禁止或刪除 內容自動屏蔽作者: derikchan 時間: 2006-1-17 10:29
Hi brothers,
Almost finish!!!!!!! Couple cap & signal wiring not finish yet, hopefully it can sing within this week!!!!作者: ahwah 時間: 2006-1-17 20:32 標題: Desperately seeking your advice Hi Gijoe_22:
Looks absolutely fabulous ! Wish to have a chance to hear it !
I was hoping you could give me some advice on the first GG you’ve made :
- is your chassis connected to the ground ? If yes, which “ground” ? How ?
- to which “ground” is your RCA connected ? How ?
Thanks for your help.
Regards,
ahwah作者: derikchan 時間: 2006-1-18 09:29
Hi Ah Wah,
Please email your phone no. to gijoe_22@excite.com
Derik作者: audiocat 時間: 2006-1-19 02:23
請問聲音如何? 作者: derikchan 時間: 2006-1-19 09:41
Hi every brothers,
Not finish yet!! Last night did a very tough job, it take me 3 hours to finished the signal wiring (total 18pcs shielding wire & limited space). Let's see some photos!!作者: derikchan 時間: 2006-1-23 11:11
Ha ha ha ha............
Finally SuperGG Finished!!! It's a very tough project but the reward is unmeasurable. It's sound amazing, high resolution, detail, good sound stage, good channel separation, dynamic & smooth, wide band width.... I think will improve more after burn-in! Later will share with all of you!
Let's see the photos!!!作者: william 時間: 2006-1-23 11:21
正!! Really Super!!
gijoe_22, 請問材料總值多少?作者: rpbatman 時間: 2006-1-23 11:58
Yes, looks great!!! Must sounds great as well!!!!
I am also interested to know how much is the cost? $7500? or $10,000?
Thanks for sharing.作者: mission 時間: 2006-1-23 13:42
Appreciate the great sharing from gijoe_22 for this achievement:
Beside the cost used for setting this gear up, it is far more important to have gijoe_22's contribution in order of:
1) Passion: Demonstrated in building this gear
2) Sharing: Open and Unselfish...
3) Design: Changing from stereo version to mono version; and separte chasis
4) Innovation: Parts placement/selection, such as using choke, selector/relay position...
5) Structure & Organization: Have circuit schema, calculation, planning...
6) Workmanship
7) Patience and Effort
8) Trouble shooting
9) Parts conservation - use old parts as far as it is feasible
10) Knowledge
11) ...
z) Parts cost作者: patten88 時間: 2006-1-23 18:40
嘩! 好鬼正. 不如叫ah kit 整個昇級班.
但在放大部份已取消了三顆0.1uf電容. 是否對低頻有幫助.
brian作者: william 時間: 2006-1-23 20:42
gijoe_22 really make us interested in DIY! Thx!
I think cost is not the main factor to consider for making a DIY product, the enjoyment and achivement after successfully built worth more than anything!作者: derikchan 時間: 2006-1-24 10:03
Because of separate two channel, it's no need to keep the 0.1uf. Just use 0.047uf paralle to the 100uf decoupling cap. It's inprove the high frequency!作者: Casper 時間: 2006-1-27 21:42
Hi Gijoe, this is great stuff. Please let us know more after burn-in.
Paul作者: Conrad2002 時間: 2006-1-30 11:37
Yes, it's really a very interesting upgrade. It's definition and sonic performance must be very good. Pl. reserve a seat for me when it is ready to test at akitla's new place.作者: hcheung 時間: 2006-2-7 23:44
gijoe_22,