標題: 特別課程: CDM-X CD 轉盤製作班 Advance Class I [打印本頁] 作者: kk_ho 時間: 2008-5-27 09:35 標題: 特別課程: CDM-X CD 轉盤製作班 Advance Class I Receive some feedback, the sound quality is better than Marantz SA11.
It should be upgrade.....about the sound quality.
Please register here first, I will checking the feedback and decide open or not.
Advance Class content:
Modification II.
Pure 75ohm Digital Cable (Canare)
Pure direct path.......
The date and time is not fixing, need to check with the feedback and timeslot.
It should be pure 1 day class. Please take your own risk if you cannot be finish. (i.e. for mid-to-high hand people)
Are we talking about to modify the CDM-X already completed? Can you give more details on how much modification will be done as I am quite weak on removing stuff from PCB and re-soldering again.
1. Please burn-in 200 hour before coming.
2. Your CDP is fully complete.
3. Able to take a risk.
4. Need to bring money.....
5. Good soldering skill, experience in DIY before, atleast 1-2 DIY product making by himself.
MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)
Single day event, should be before June. Time around 2:30pm-11:30pm
KK作者: muka 時間: 2008-5-28 06:31
Please count me la
1. burn-in now, will > 200 hour at that time
2. fully completed
3. Already take a lot of risk
4. :roll:
5. Good soldering skill but 有D老花
[quote:fe997fa225="kk_ho"]Requirement:
1. Please burn-in 200 hour before coming.
2. Your CDP is fully complete.
3. Able to take a risk.
4. Need to bring money.....
5. Good soldering skill, experience in DIY before, atleast 1-2 DIY product making by himself.
MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)
Single day event, should be before June. Time around 2:30pm-11:30pm
KK[/quote]作者: andypoon 時間: 2008-5-28 09:03
[quote:269e1fa197="kk_ho"]MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)[/quote]
請問個 price 有幾 high ? 我係窮等人家嚟架咋!作者: kk_ho 時間: 2008-5-28 10:39
砌夠五個人報名先講ィ
我吾會學人哋四個團購變左一架飛機口既
吹水定D開發日程出來,原來係做架747作者: leonlau 時間: 2008-5-28 11:46
Hi KK,
I think there should have some DIY beginners like me that want to improve the sound quality but very sure that we are unable to do the modification by ourselves. So, instead of just open the workshop for 高手, will you also offer an option to do the modification by yourself (of course with a bit additional cost) for us to consider?
1. Please burn-in 200 hour before coming.
2. Your CDP is fully complete.
3. Able to take a risk.
4. Need to bring money.....
5. Good soldering skill, experience in DIY before, atleast 1-2 DIY product making by himself.
MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)
Single day event, should be before June. Time around 2:30pm-11:30pm
KK[/quote]
1. can start to do now
2. completed - playing (silver wire is okay now)
3. What is the risk? Total lost, or just the "CDM-9" :shock:
4. I have some $$ - but not much
5. Not too skillful (NOT GOOD) ops: , with 3 DIYs with you, 1 CJ-Pre amp by myself, 1 cheap cheap transistor phono amp
Before June. Does it mean 31May2008? If so, I am sure I can't join because having exam preparation.
However, I am also not so confident to be with such "GOOD SKILL".作者: likylam 時間: 2008-5-30 01:27
KK sir;
呢部Advance CDX 又會有乜唔同o左?
報個名先!唔該!
歷奇作者: kk_ho 時間: 2008-5-30 08:49
Need to complete the course of CDM9 / Pro2 first.作者: accphoto 時間: 2008-5-30 11:14
玩到盡,當然好!預埋我,不過我部未開聲........ 作者: dc9133 時間: 2008-5-30 23:22
I am interested... please let's me know when you open the DIY course.
Thanks作者: kk_ho 時間: 2008-5-31 02:01
You need to have complete the CDM9 / CD-PRO 2 first.作者: likylam 時間: 2008-5-31 22:03
OK!等下次吧!
Thanks ^=^作者: muka 時間: 2008-6-5 22:56
煲咗超過200小時,基本上未熄過机。接上8粒PCM1704 DAC,真的不錯。
When is the advanced class ? :作者: kk_ho 時間: 2008-6-6 11:16
OK, interest please post name here: MAX = 7.
Date : 29-June (Pending), absolute 1 day class.
Price : TBD.
Please confirm.
Muka
Accphoto
AP (Japanese)作者: andypoon 時間: 2008-6-6 23:18
[quote:84b2f3b84c="kk_ho"]OK, interest please post name here: MAX = 7.
Date : 29-June (Pending), absolute 1 day class.
Price : TBD.
Please confirm.
Muka
Accphoto
AP (Japanese)[/quote]
KK Sir,
對不起,可否改在 22/6 或 6/7 上堂呢? 因 29/6 小弟好大機會不在香港。謝謝!
AP作者: kk_ho 時間: 2008-6-6 23:26
AP,
Need to waiting to filll max people. around 7.
KK作者: bbleung 時間: 2008-6-7 00:26
KK Sir,
請盡量安排在星期日,6月份任何一個都好。能夠的話請留個位比我!作者: accphoto 時間: 2008-6-14 16:32
29 號我都唔得呀!會唔會有第二個時間?作者: ricky42c 時間: 2008-6-14 23:50
KK sir