特別課程: CDM-X CD 轉盤製作班 Advance Class I

Receive some feedback, the sound quality is better than Marantz SA11.
It should be upgrade.....about the sound quality.


Please register here first, I will checking the feedback and decide open or not.

Advance Class content:
Modification II.
Pure 75ohm Digital Cable (Canare)
Pure direct path.......

The date and time is not fixing, need to check with the feedback and timeslot.

It should be pure 1 day class. Please take your own risk if you cannot be finish. (i.e. for mid-to-high hand people)


KK.

我報名呀!

  幾時有初級班

Hello KK,

Are we talking about to modify the CDM-X already completed? Can you give more details on how much modification will be done as I am quite weak on removing stuff from PCB and re-soldering again.

Eric

kk,

我怕小弟o的工藝未合格, 參加你個course bor...  可以的話, 預我一份; 不過真係要睇時間

同我部陳年philips 960比一比之下, 個新盤未得閒搞晒銀線(得條clock), 高低都好過960...

要到六月中先再有時間搞...依家半夜開始溫習 zzz

SamSam

Requirement:

1. Please burn-in 200 hour before coming.
2. Your CDP is fully complete.
3. Able to take a risk.
4. Need to bring money.....
5. Good soldering skill, experience in DIY before, atleast 1-2 DIY product making by himself.

MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)

Single day event, should be before June. Time around 2:30pm-11:30pm

KK

Please count me la

1. burn-in now, will > 200 hour at that time
2. fully completed
3. Already take a lot of risk
4.  :roll:
5. Good soldering skill but 有D老花

[quote:fe997fa225="kk_ho"]Requirement:

1. Please burn-in 200 hour before coming.
2. Your CDP is fully complete.
3. Able to take a risk.
4. Need to bring money.....
5. Good soldering skill, experience in DIY before, atleast 1-2 DIY product making by himself.

MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)

Single day event, should be before June. Time around 2:30pm-11:30pm

KK[/quote]

[quote:269e1fa197="kk_ho"]MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)[/quote]
請問個 price 有幾 high ? 我係窮等人家嚟架咋!

砌夠五個人報名先講ィ

我吾會學人哋四個團購變左一架飛機口既

吹水定D開發日程出來,原來係做架747

Hi KK,

I think there should have some DIY beginners like me that want to improve the sound quality but very sure that we are unable to do the modification by ourselves.  So, instead of just open the workshop for 高手, will you also offer an option to do the modification by yourself (of course with a bit additional cost) for us to consider?

Leon

[quote:52adcf895f="kk_ho"]Requirement:

1. Please burn-in 200 hour before coming.
2. Your CDP is fully complete.
3. Able to take a risk.
4. Need to bring money.....
5. Good soldering skill, experience in DIY before, atleast 1-2 DIY product making by himself.

MAX people is around 5. (Reason for Ultra high teaching service --> high price, but max performace of your CDP.)

Single day event, should be before June. Time around 2:30pm-11:30pm

KK[/quote]
1. can start to do now
2. completed - playing  (silver wire is okay now)
3. What is the risk?  Total lost, or just the "CDM-9" :shock:
4. I have some $$ - but not much  
5. Not too skillful (NOT GOOD) ops: , with 3 DIYs with you, 1 CJ-Pre amp by myself, 1 cheap cheap transistor phono amp

Before June.  Does it mean 31May2008?  If so, I am sure I can't join because having exam preparation.

However, I am also not so confident to be with such "GOOD SKILL".

KK sir;

呢部Advance CDX 又會有乜唔同o左？
報個名先！唔該！

歷奇

Need to complete the course of CDM9 / Pro2  first.

玩到盡，當然好！預埋我，不過我部未開聲........  

I am interested...   please let's me know when you open the  DIY course.

Thanks

You need to have complete the CDM9 / CD-PRO 2 first.

OK！等下次吧！
Thanks ^=^

煲咗超過200小時，基本上未熄過机。接上8粒PCM1704 DAC，真的不錯。

When is the advanced class ? :

OK, interest please post name here: MAX = 7.

Date : 29-June (Pending), absolute 1 day class.

Price : TBD.

Please confirm.

Muka
Accphoto
AP (Japanese)

[quote:84b2f3b84c="kk_ho"]OK, interest please post name here: MAX = 7.

Date : 29-June (Pending), absolute 1 day class.

Price : TBD.

Please confirm.

Muka
Accphoto
AP (Japanese)[/quote]
KK Sir,

對不起，可否改在 22/6 或 6/7 上堂呢? 因 29/6 小弟好大機會不在香港。謝謝!

AP

AP,

Need to waiting to filll max people. around 7.

KK

KK Sir,
請盡量安排在星期日，6月份任何一個都好。能夠的話請留個位比我！

29 號我都唔得呀！會唔會有第二個時間？

KK sir

有堂上預埋我～(LS7)

Thanks
Ricky  

accphoto,
AP,
SamSam

多謝你們的參與, 但最少要多2位才能成團, 可能要等下一輪CDM9/CDPRO2完成才能開班.

[quote:732f596b58="Admin"]accphoto,
AP,
SamSam

多謝你們的參與, 但最少要多2位才能成團, 可能要等下一輪CDM9/CDPRO2完成才能開班.[/quote]

小弟還响公司做緊o野, 唉 :shock:

見到咁既消息, 唯有呼籲其他同學快快俾錢參加, 好似還有ricky+bbleung呀

ops: 好肚餓, 搵o的o野食下再做

[quote:fccd9c788e="Admin"]accphoto,
AP,
SamSam

多謝你們的參與, 但最少要多2位才能成團, 可能要等下一輪CDM9/CDPRO2完成才能開班.[/quote]KK Sir,

既然人少少不如「攝」埋入CDM9/CDPRO2班一齊上啦!
如果唔得就繼續等下，煲住機先喇。

AP上

Still have some day to 1-July, let wait the latest news la.

終於都返香港啦！報到先。

KK Sir，是否明晚如期舉行！

bbleung,

多謝你們的參與, 但最少要多2位才能成團, 可能要等下一輪CDM9/CDPRO2完成才能開班.

Total need 5 people.

KK

太可惜，如果唔夠唯有等下一輪夠籌再黎。

One more only! Please ~~~~~ !!!

Advance Class 決定延期, 多D人一起玩更高興

訂金可保留或退回. 如要退回請Email: billing@hififever.com

AP,

You pay double price and help one more people to modify.

It is a method.

But please note is SINGLE day course.