找回密碼
 註冊
查看: 24371|回復: 62

DAC 班 (10味)

  [複製鏈接]
kk_ho 發表於 2011-12-27 22:25:22 | 顯示全部樓層 |閱讀模式
本帖最後由 kk_ho 於 2012-3-4 15:29 編輯

2012年, 為大家預備了DAC 班, CAS 入門必備

日期約在4月上旬

共六款, $2880起

1. WM8740 雙並聯, 有USB $2,880.   LINN 最喜歡用此解碼IC
2. TDA1541 $2,880.        PIONEER PD-T07 用此IC
3. TDA1547 $3,280.         Philip SA-1 用此IC
4. PCM63P $3,280.           Krell, Sonic Frontier, Wadia 用此IC
5. PCM1704 四枚使用 $3,680.     DENON 旗艦CD機用此IC
6. CS4398 雙並聯, 有USB $3,680.   Marantz NA7004 用此IC
7. AD1955 MK1 雙並聯,有USB, APPLE AIRPLAY,升頻
8. AD1955 MK2 雙並聯
9. AD1862 20 bits DAC, $2880.  Denon Reference CD player 喜歡用此解碼IC
10. AD1955 MK1 雙並聯,有USB + CDPRO2 IIS Direct up-sampling, Black Gate, RMG x 3 seats available only

你問我1-9 點楝, 答你吾到, 全部我都砌過, 一定要楝, 砌哂佢, 加埋都係$19,680. 有排你玩,地球上有名的DAC在你手

包R-Core 變壓器, 鋁機箱
兩堂玩完, 學費$450

升級零件祇有Opamp(民用)及 Holco 電阻.

BLACKGATE 同 RMG 焊吾入, 吾好搞
bigboyhk 發表於 2012-2-15 22:15:45 | 顯示全部樓層
多謝你開解我呀.不過男人這動物是喜歡屌來屌去的.
Micmusic75 發表於 2011-12-28 03:17:49 | 顯示全部樓層
Very interesting course
shbyeung 發表於 2011-12-30 17:10:46 | 顯示全部樓層
interested
 樓主| kk_ho 發表於 2011-12-30 18:19:44 | 顯示全部樓層
記住,如果你速度快,同一時間做二款或以上DAC, 學費也是收一次的。當然要兩堂完成兩個DAC是無難度的

每堂8 小時,一定夠

我一日8小時估計可砌五台呱,砌野最叻係ManLam, 跟住便是CKeung
ayuen 發表於 2012-1-21 03:14:31 | 顯示全部樓層
回復 4# kk_ho

KK Sir,請問會開班嗎?想砌部DAC用Mac Book Pro做source, USB傳送。第六款有USB,啱我嗎?
 樓主| kk_ho 發表於 2012-1-21 10:51:03 | 顯示全部樓層
1,6 也可以

一定會開班,放心

買台Pioneer N-50 再摩也不錯
jastudio 發表於 2012-1-21 12:52:37 | 顯示全部樓層
KK sir,WM8741 底板有幾大?
jastudio 發表於 2012-1-21 12:53:10 | 顯示全部樓層
sorry, 應該系8740。。。
ayuen 發表於 2012-1-21 14:04:18 | 顯示全部樓層
Thanks KK Sir, Terrific. I already have a VRDS CD transport and a 1955 DAC for CD. Wanna build one more DAC for CAS to play 24bit/192k source files in living room.

Looking forward to a course to building a CD transport only, best with SACD and module to convert DSD to I2S to be played by the 1955 DAC.
 樓主| kk_ho 發表於 2012-1-22 00:43:04 | 顯示全部樓層
我初一中午後會閉關四小時做一個USB to S/PDIF converter, 裡面既chipset 未試過有人咁用
ayuen 發表於 2012-1-22 02:27:58 | 顯示全部樓層
Wish your great success in the first day of year of Dragon... then we'll have a new toy to play with.

BTW, my DAC 1955 MK2 intermittently displays 'no signal', though the co-axial is still 'locked'. Any glue? Anyhow I replaced a BG 47uf and a wima .001u cap in the digital receiver section (my multimeter always detects short circuit with these pair of caps) and hope the issue was fixed.
ayuen 發表於 2012-1-22 02:28:23 | 顯示全部樓層
回復 10# kk_ho

Wish your great success in the first day of year of Dragon... then we'll have a new toy to play with.

BTW, my DAC 1955 MK2 intermittently displays 'no signal', though the co-axial is still 'locked'. Any glue? Anyhow I replaced a BG 47uf and a wima .001u cap in the digital receiver section (my multimeter always detects short circuit with these pair of caps) and hope the issue was fixed.
 樓主| kk_ho 發表於 2012-1-22 17:23:20 | 顯示全部樓層
Ayuen,

If you still not fix the issue, please let me know. Most people have problem in Digital input for MK2 issue.
ayuen 發表於 2012-1-22 17:50:53 | 顯示全部樓層
回復 13# kk_ho

Thanks in advance KK Sir. It's been working more than 10 hours and only disconnected once for 3, 4 seconds. The TEAC VRDS transport is 15 years old and I also cleaned the co-axial output with WD40.

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有帳號?註冊

x
 樓主| kk_ho 發表於 2012-1-22 19:42:11 | 顯示全部樓層
老實講,DIR9001穩定好多,雖則衹食96KHz.
ayuen 發表於 2012-1-23 00:10:35 | 顯示全部樓層
It's unfortunate that we have to take the good with the bad sometimes! Hope it gets stable soon. I wanna try it's I2S input...
ayuen 發表於 2012-1-23 18:27:08 | 顯示全部樓層
開左廿幾個鐘,好似幾好!KK sir有無USB to I2S 食到192K/24bit 嘅module等我用notebook USB出來玩吓?
 樓主| kk_ho 發表於 2012-1-23 20:58:25 | 顯示全部樓層
本帖最後由 kk_ho 於 2012-1-23 21:05 編輯

我做緊,等一下

Hififever 上面還有一部full modify AD1955 DAC, 你可聽下同你部分別,當然你要抬上來試
ayuen 發表於 2012-1-23 21:57:05 | 顯示全部樓層
正!有新嘢玩!等KK sir好消息!我2月11日砌preamp時試下有無手抬埋上嚟...有改善空間又摩摩佢。
bigboyhk 發表於 2012-1-29 23:54:29 | 顯示全部樓層
不過如果有ES9018就好啦...
 樓主| kk_ho 發表於 2012-1-30 08:30:06 | 顯示全部樓層
如果入得哂32bits data 入去才有意思。
ayuen 發表於 2012-1-30 21:28:35 | 顯示全部樓層
呢部用9018sabre,可惜一舊過連blue ray/SACD transport,我用嚟睇blue ray and DVD,知道
有shop攞左來mod當cd/SACD用。我就想整多部淨DAC,分體嘅係正點!

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有帳號?註冊

x
 樓主| kk_ho 發表於 2012-1-31 08:50:52 | 顯示全部樓層
標準Coaxial Digital output 出CD/SACD stream 係設定係44.1KHz/16bits.

想要出RAW, 你衹可以用HDMI.

仲有,此機Audio Performance 衹係好,並非發燒級,鋪頭同雜誌用普通機同佢PK梗係咩啦

以上純粹個人觀點。以防有契弟又成個畫面capture跟住攞來做新聞
BW801 發表於 2012-1-31 10:06:03 | 顯示全部樓層
"Thanks in advance KK Sir. It's been working more than 10 hours and only disconnected once for 3, 4 seconds. The TEAC VRDS transport is 15 years old and I also cleaned the co-axial output with WD40. "

Cleaned with WD40???? !!!!!!!
WD40 is a lubricant, not for conductor....    !!!!!
ayuen 發表於 2012-1-31 10:54:02 | 顯示全部樓層
本帖最後由 ayuen 於 2012-1-31 10:56 編輯

回復 24# BW801

WD40 is also a cleaner to remove deeply accumulated filth and thus improve conductance.
BW801 發表於 2012-1-31 14:30:25 | 顯示全部樓層
回復 25# ayuen

well, WD40 is not a conductor itself.  while it has "removed deeply accumulated filth",  you have left some non-conductive material on the socket.  That is WD40.  If you don't clean it off with something else,  you have not quite improved the overall conductivity of the surface. If you use a microscope to look at it, you have left a lot of things there.
jastudio 發表於 2012-1-31 16:09:10 | 顯示全部樓層
i think WD40 is oil base...also hard to remove...
ayuen 發表於 2012-1-31 16:33:16 | 顯示全部樓層
Well, if we are using a microscope to look things up. there are always rugs and dens which prevent perfect contact. In terns of practical application, WD40 can be used to clean electronic and electrical connections. It is not a conductor, by all means it is not an isolator either.
alfcat 發表於 2012-2-1 11:54:51 | 顯示全部樓層
哈,1955PRO MKII 。。。

我都剛剛砌咗部試緊 。。。不過輸入那面重有 D 料未換。開咗聲唱陣先再攪 。。。

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有帳號?註冊

x
 樓主| kk_ho 發表於 2012-2-1 12:01:18 | 顯示全部樓層
MK2 份電源真係好default
phoenix510 發表於 2012-2-1 13:48:53 | 顯示全部樓層
MK2 又有新野
ayuen 發表於 2012-2-1 15:26:01 | 顯示全部樓層
回復 29# alfcat
Power supply都換埋!祝越攪越好聲!
alfcat 發表於 2012-2-1 15:31:20 | 顯示全部樓層
其實這個 POWER SUPPLY 是從自己舊的 1955PRO 搬過來的而已 ... 不是新的.
wkw9811 發表於 2012-2-1 17:18:14 | 顯示全部樓層
想查詢可否電郵電話至wkw9811@yahoo.com
alfcat 發表於 2012-2-1 18:54:26 | 顯示全部樓層
想查詢可否電郵電話至
wkw9811 發表於 2012-2-1 17:18



請收PM
phoenix510 發表於 2012-2-1 19:31:45 | 顯示全部樓層
KK sir 唔知有冇可能加多(1味) DAC 1955 pro mk2?
 樓主| kk_ho 發表於 2012-2-1 22:44:54 | 顯示全部樓層
OK. DAC 班 (7味)
alfcat 發表於 2012-2-1 23:14:14 | 顯示全部樓層
噢,苦害了 KK SIR 。。。又要整多件 。。。
phoenix510 發表於 2012-2-1 23:42:07 | 顯示全部樓層
本帖最後由 phoenix510 於 2012-2-2 02:23 編輯

等開班報名
thankyou kk sir
ayuen 發表於 2012-2-2 01:40:38 | 顯示全部樓層
回復 37# kk_ho

Thumbs up.
ayuen 發表於 2012-2-2 01:47:05 | 顯示全部樓層
回復 33# alfcat
物盡其用,超讚!
phoenix510 發表於 2012-2-2 15:07:00 | 顯示全部樓層
請問KK sir
AD1955 MK2 雙並聯,有冇可能有,,,,,,,USB同升頻?
ayuen 發表於 2012-2-4 01:54:29 | 顯示全部樓層
期待DAC course之後出個齋CD transport course.有埋I2S output去AD1955MK2! 的 DIYer越玩越精
BW801 發表於 2012-2-4 22:18:52 | 顯示全部樓層
"It is not a conductor, by all means it is not an isolator either."
well , if it is not conducting electricity, it is isolating/insulating...... electron only pass through conductors.  Is ok if you don't accept the fact and listen to someone who has knowledge.

"i think WD40 is oil base...also hard to remove..."
You are correct.  And oil is poor conductor.

Period.
ayuen 發表於 2012-2-4 23:23:26 | 顯示全部樓層
回復 44# BW801
My whole purpose is to clean up the 15 years old filth. I would have to worry if WD40 is a conductor and I didn't clean it up properly which potentially caused a short circuit.

End of discussion.
bigboyhk 發表於 2012-2-12 23:22:58 | 顯示全部樓層
KK Sir 我有部強國製的1955DAC, 我想摩改請問是否可以join這班或其他班呢?
 樓主| kk_ho 發表於 2012-2-13 09:16:28 | 顯示全部樓層
這班是砌機班,不是摩機班
bigboyhk 發表於 2012-2-14 00:34:22 | 顯示全部樓層
Sorry 搭錯線
bigboyhk 發表於 2012-2-15 00:02:42 | 顯示全部樓層
唔好意思呀係我表達得唔好,我部機不是自己砌是廠機,所以才想摩機....
tommy仔 發表於 2012-2-15 13:12:21 | 顯示全部樓層
Bigbohk兄
這裡導師回答人家態度係差唔多,不是你的錯!
您需要登錄後才可以回帖 登錄 | 註冊

本版積分規則

GMT+8, 2024-4-16 16:39 , Processed in 0.067765 second(s), 26 queries , Gzip On.

© 2001-2011 Powered by Discuz! X3.2. Theme By Yeei!

快速回復 返回頂部 返回列表