特別課程召集 - CDM-X CD 轉盤製作班 (只限CD理論/DAC課程學員) - 已完結

FULL HOUSE!!!

特別課程 - CDM-X CD 轉盤製作班 (只限CD理論/DAC課程學員)

已確認報名者 (如已正式報名和交款者不在列表中請電郵給我們(admin@hififever.com) :
sam_sam (已付定金)
hifi301 (已付定金)
Patrick5 * 2 (到付)
chc51 (已付定金)
Leon(已付定金)
AP (已付定金)
modi (已付定金)
muka (已付定金)
tommy2047 (已付定金)
bcheong (已付定金)
MB (到付)
q
bbleung (到付)
jastudio (到付)
accphoto (到付)

為了迎合大家需求, HiFi Fever 從2008年開始會以召集型式開設工作坊, 砌機課程等等. 最先達到最少報名人數要求的便先行開班! 大家留名時亦可說出自己的特別要求, 我們會儘量配合!

1. CDM-X loader
2. 入門版 / 終極版
3. 終極版可選True16/24 bits out, 44.1Khz, 48kHz, 96kHz, 176.4kHz & 192lHz output
4. 用家可用這高階輸出接至閣下已有的192khZ的 DAC 如 AV Amp, Wadia etc. 很多用家封印了具192khZ 的解碼能力多時
5. 亦可一試44.1/16 Re-clock 輸出
6. 非一般CD Transport可及

名額: 每班最少8名最多15名

CD理論/DAC課程學員請留意電郵

ADAMCYC,

請告訴我你CDM9 修理後仲有無事?

KK

how can I join the workshop ???? very interested

我有興趣,普通版和終極版分別多少錢?

1. you did not re-read the TOC

2. your sensor may be out of order.

Check 3 pin wire first.

That means when its play the cd with totally 13 songs, its just show & max can play up to track 9, can't play anymore from track 10....change another cd with 11 tracks & its the same!
I've try to switch on & off few times but its display 9 songs in total & it also stop after finished playing track 9.
Don't hv the camera right now, m/b take some photos later.

Bbleung,

Can you describe more clearly before I draw the comment.

KK.

KK Sir, 我部CDM9只能讀到9tracks,初時都冇注意。今日老板想聽一首歌，換左只CD後想播，點知冇左個只歌，揀來揀去都唔得。係咪有D地方要注意下！

This product DOD la....

定価 200,000yen approx $14000 HK

Or you can join CDM9 course.

Is it possible to buy a CDM9 Mech ?
Where can i buy it and what is the price ?

CDM-9 PRO

MARANTZ マランツ 人気のトップローディング CDプレイヤー CD-23 （定価\200.000）です。
仕様は : 1ビーム・スウィングアーム CDM-9 Pro ... D/Aコンバータは、評判のビット・ストリーム DAC7
重厚なガラスの蓋 ...洒落たデザインにマランツのトップ技術が詰め込まれたCDプレーヤーです。

Please check your motor voltage wire. (4 pin cable)

hi kk sir
will there be another cdpro  assembly course in near future??
i am really interest in it.............
thx...................
waiting...............

kk sir,

考完試諗住可以嘆下

點知---我個盤休息一個星期, 到今日得閒好似發脾氣...

今日一開機, 佢話no disc(冇碟), 要re-start部機先load到

係咪我有咩做得唔好, 一話小弟屋企太光... 再試多幾次, 好似要搵o野擋住燈光先好返少少

一話個sensor傻下傻下; 點算 :?:  :!:

謝謝

Jason,

You are performance upgrade type.

We will have simple show soon (before the ADV class)

Demo using 3 type.

Basic, performance, highend. (with CDPRO2 X CDM9 crossover)

Total 6 combination.

KSIR

First of all I want to thank you KK sir for his help. He came to the class even he got flu, and on the last day he stay over 1:00 AM(that was the time go home) to help us finish it and I think he stayed much longer because still some classmate haven't finished...from this, I think not many other DIY club can provide this kind of services with such great attitute!!

My CDM9 is still warming up, at first the sound feel a bit sharp and harsh (maybe because my caps) but the other day when I play the same CD it already sound much better, completely beat my grandpa cd player... a lot more detail but warm (who said old model cd transport cannot beat new cd transport model? in hifi world I believe new technology is not absolutly equal to better sound), the sound stage and image is more noticibly accurate.

Still, I am waiting for the up-sampling part to come out!! very look forward to it!

Thank you!

Jason

hi k ksir
when will another cd course be arranged,??
I am interested in it very much....

[quote:0efcc822c2="kk_ho"]老兄點解吾自己砌?[/quote]
係呀! 我覺得DIY o既樂趣七成在於過程，三成在於成果噃。

K.K.Sir：我還未完成啊！ :cry: 你幾時補堂比我啊？ :

得到KK Sir的特別安排下，終於能完成左部機。在這還是要特別多謝KK Sir在當晚抱病還幫忙我呢個新手攪好部機。真是萬分感激！多謝你，KK Sir。
今日聽左6個鐘左右，開始時聲有D硬，聽左個零鐘後休息左一陣，(沒有關機)食完野再聽，之前D生硬都明顯少左。整體表現明顯高左。但唯一還爭些少就係比較我自已聽開部機時部M9未夠清，(個人口味)相信去Ext Clock 條線和另外兩組換左銀線之後應該都會三級跳。
一於聽KK Sir 講，煲番兩佰個鐘後等KK Sir 部 Pro 2比較一下。
再次多謝KK Sir 呢幾次身體唔舒服都幫手完成左部機。亦多謝hififever各位大大做出呢D咁高水平Course！

老兄點解吾自己砌?

請問有沒有人想賣出你的CD Transport ?
大細機箱都ok.

Even though I have not finished my CDM Pro 9 yet ( I am the last one to order the large case so I have to wait..) , I am really amazed on the technical creativity of fitting a transport into a case, though a lot of metal work but I think I learn a lot from the course. Thanks for KK 's devotion to the course and toleration for our beginner 's fault.

I totally agree that KK Sir is very helpful. KK was even willing to help on my VT60SE while that day was allocated for other course. Really enjoy the DIY process with KK Sir guidance.

DIY is really creative by seeing so many different ways in assembling the CDM9 in the big case. Very nice work with copper base and support.

Eric

Admin, hh_ko,

there some nice photos of CD player chassis / enclosures. Is it possible to buy them directly from you? I'm looking for some nice top loaded chassis for my CD ROM based CD player.

Please let me know.
Best regards,
vcelkamaja

Hi Leon,

Yes, the motor noise is quite audible when my CDM9 was played with the top cover opened (I am using the big case).  It was better when the cover was closed.  If you are using the small case, perhaps you have to make a cover for it.

Andy

Hi KK, I'd started to test the new toy for a while.  Just have a few questions as below:

1) After I changed the default clock to the external clock, I feel the bass is a little bit more solid and the sound seems a little bit more focus.  Is this the way the re-clock should work?  Or the difference should be more prominent?

2) For the first few tracks, the high turning speed make a quite audible high frequency noise together with the normal motor noise.  This high frequency noise gradually faded out after track 4-5.  Is this my CDM9's problem rather than a common issue and how should I fix it?

Many thks,
Leon

Special thanks to KK for guiding and helping me to finish my CDM9.  Just can't imagine a super DIY beginner like me can construct a CD transport by myself as this is my first usable electronic toy after I resumed back to use soldering iron 20+ years before.  Also thank you to 叔叔 for guiding me on the 金工 stuffs.

Frankly speaking, while already knew this workshop is not a simple plug and play one, it has more 金工 works than I expected.  However, this can also help me to rethink how to utilize alternate cases which we sometimes can't find a perfectly fit cases for our systems.

I share the same view as Sam-Sam.   KK sir is very helpful in solving our problems.   Because I need to leave earlier, he even  helps me to complete some soldering works.  thank KK sir.

Yes, we are remember this issue.

Please wait around at around end of June.

KK Sir,

請問終極版 upgrade 係唔係有 spare 鐳射頭附送? 何時可以攞呢?

AP

William / Kk,

How could you change the schedule in such short notice! I prepared all the schedule on Sunday and didn't noticed the change?!

kk sir,

今日的加堂, 小弟終於完成了

遇到你依位阿sir, 小弟有時真係知講咩好 - 小弟返家剛沖完涼, 都成點幾, 但你仍然為幫同學們而努力

我們的辛苦, 都不及你的百分之一... 因為我們不斷為你製造難題, 你都不辭勞苦為大家挨

有好多時, 你講完一次, 大家都會繼續爆錯, 尤其小弟 ](*,) ; 真係好感激你

謝謝kk, 還有william和叔叔 (多謝多幾次都好應該)

嘻! 終於完成了這部 CDM9 Transport! 雖然過程困難重重，多得 KK Sir 悉心指導和無限期加班，最終守得雲開見月明!

附上圖片說明，歡迎大家觀摩賜教 !

Andy

KK Sir / Admin

請問25/8/08(11:00am-6:00pm)還有沒有堂？

謝！

明

PHOTO II

Photo of Supp class.

估唔到, 真係好復雜, 好多o野搞...  

過往, 小弟都好多時拎返屋企做, 今次就一樣都冇 - 所以都好慢下......

希望可以快o的完成啦 :!: 不過, 今次真係沒有kk的話, 個盤一定搞唔掂...做電子真係唔同 :

還有, 叔叔既出現, 使我在hififever鑽孔都順利好多哦

最後, 我見過幾位高手的cd機, 做得好鬼死靚, 我都要加把勁先得...  ops:

焊工好了一點點, 但又到金工是下一個目標; diy的路真難行, 但行得好有意思

謝謝kk + 叔叔

I want Canare RCA socket.  BTW, I don't have your mobile no. yet and so can't SMS you.  Hope you can see this reply before leaving.

See you tomorrow.

Leon

AP and all,

Please let me know you need Canare RCA socket or Canare XLR socket.

SMS to me...............

Chicken Sir.

Hi, William,

Did you get my large case yet ? Otherwise, i do not know what to do.

Patrick,

Please short JP303.

I believe this point is the major problem.

KK.


[quote:839df2fd80="atrick5"]Hi KK Sir,
Can you send me the schematic of the CDM9 for trouble shooting?
I had completed the regulator portion and connected the CDM9 loader all work normal. BUT !!!!! NO SOUND !!!!!! output :cry:

Regards,
Patrick[/quote]

It is difficult to teacher to reserve his time on holiday too.

For DIY, no problem la.

Hi KK Sir,
Can you send me the schematic of the CDM9 for trouble shooting?
I had completed the regulator portion and connected the CDM9 loader all work normal. BUT !!!!! NO SOUND !!!!!! output :cry:

Regards,
Patrick

Admin,

Sorry, it is very difficult to me to be free on Sunday and Holiday. I have to celebrate Mother Day with my family on 12/05/08 and I have to go to Church every Sunday. Do you have any other option?

明

Eric, big case will have next stock available soon, i will reserve one for you.

因下星期一有1整天假期, 現改為

12/5/2008 (mon) - 11:00am-10:00pm
25/5/2008 (sun) - 11:00am - 6:00pm

如未完成的請抽時間出席

Hello William,

Is the big case still available? If yes, I want to take one. Let me know.

Thanks

Eric

加堂安排

19/5/2008 (mon) - 7:30pm-10:30pm
25/5/2008 (sun) - 10:30am - 7:00pm

如未完成的請抽時間出席

As the coming weekend will be Mother's Day, I think most of us will not be available on either May 10 or 11.

How about the last lesson on May 17 (Sat)?