See my comment below:
1. At the show, we are using RV01 power supply board, it is a basic one. (for our course, we use RX03 power supply board, it adding a lot of feature, not disclose here la....)
2. RX03 can be adding Up-sampling board at future time. There are 2 version of up-sampling board. Basic and Advance
Basic : 4 output mode :
44.1/16 DSP re-clocked + Interpolation (not traditional TCXO clocked method.
44.1/24 DSP re-clock + interpolation,
96/24 DSP re-clock + interpolation,
192/24 DSP re-clock + interpolation
3. TWIN loader. (We can support !!!)
We have DSP engine, other does not have...... just stay on plug'n play level.
K Sir. 這也顯示這機蕊並不挑碟 --> BS !!!
Why not using CD-RW to test ?
CDRW is the best media to test this.
You are need to study more..........
Re: 特別課程召集 - CDM-X CD 轉盤製作班
好想參與,不過都要睇價錢? :twisted:Re: 特別課程召集 - CDM-X CD 轉盤製作班
有人好心報料"這pro2頭是會挑碟的, 如果需要用LP45的朋友就要小心, 不是張張可以讀到!"
K Sir温馨提示:
前" XX 乜加仙" 影相佬+口號創作佬(什么什么花式改変音色)
你們還是專心使到CDPRO2可以張張讀到才努力的找尋自已的聲音吧
"壞群之馬" 我就未聽過這一類語法, 群馬縣就知有個地方叫秋明山 Dear KK,
既然你話人"BS",我又大膽糾正你老哥的錯誤,以免誤人子弟.
Case 1
"You are need to study more"
1. "are"之後應該用過去式(past tense),應該是"needed".
2. 但在這裏"You are needed..."變成passive voice,文法上不正確,這句子應為:"You need to study more"
Case 2
日本群馬縣是沒有秋明山的.只有一個榛名山.
秋明山只是漫畫家虛構的地方.但榛名山真的是有很多髮夾彎... Dear Henry,
Thanks for your remind, I will reply your message at 發燒瑣事
K Sir.
I will show the report for CD-Pro2 CDRW, CDR, LP45 issue at afternoon.
Testing at yesterday.
I am install the pen writer SW now. Please wait. SETUP :
CD writer: Pioneer DVR-A11, Writing speed 1X mode, read and write = same machine
SW : NERO 8
Windows XP Home edition
CD Source :
1) SONY TEST CD with 99 track
2) FULL 73:40 CD disc from various song
CD-RW Media :
Mitsubishi
CD-PRO2FAIL, cannot read TOC fordisc 1 and 2
E-Blue
CD-PRO2 can read TOC, fail on reading at Track 76 at 1)
fail on reading at 65 min area at 2)
TDK
CD-PRO2 Fail on reading TOC for disc 1 (2 time OK out of 10 trial)
Disc 2 is PASS
MAXELL
CD PRO2 fail on reading TOC at disc 1
CD PRO 2 fail on playing after 63 min at Disc 2
CDM-9 can read all.
James Bond, If you need these test disc set to verify for your CD-PRO2, please let me know.
K Sir. Dear KK sir,
I am interested in CDM9, but don't know the price yet?
Jason KK sir;
請問 CDM PRO2 挑碟讀的原因何在?!
有冇試過 SACD 的 CD 層可以讀嗎?
歷奇 Liki ask:
請問 CDM PRO2 挑碟讀的原因何在?!
// Problem is on the focus parameter setting inside SAA7324.
Basically, SAA7324 is compartable to CDRW media.
有冇試過 SACD 的 CD 層可以讀嗎?
// I will test at coming Fridy dear Admin
i wish to join the course.please add my name. Liki ask:
請問 CDM PRO2 挑碟讀的原因何在?!
// Problem is on the focus parameter setting inside SAA7324.
Basically, SAA7324 is compartable to CDRW media.
咁有冇得醫?! James Bond,
Please come to HiFifever office to test it.
We have Logic analyzer, DSO, for you to use.
We have 18 set CD-PRO2 and 20 set fresh new VAM1250 laser head (CD-PRO2 use this model)
Also, please return $2000 for me when you come.
Did you remember this issue?
K2 我報名!
Hi,
我的名字不在名單中,還有沒有位,如果有位應怎樣落訂? KK Sir / Admin,
Please reserve a place for me, I will arrange payment tomorrow. Thanks.
BCheong 有大有細, Show 住個細箱比你吊住引先, 大箱是神祕的 Photo together with XBOX360, PS3, WII, PS2 Admin Sir: 1. 我未收到線材制作旳資料,請電郵. 2. 參加CDM-9制作班學費? 3.CDM-9是否全套可以工作(有無火牛,遙控,disply......). 4.機箱用大或小?價格? 5.幾時開課?請覆.yycc
Re: 特別課程召集 - CDM-X CD 轉盤製作班 (只限CD理論/DAC課程學員)
kk sir / admin:我都很想參加cdm-xcd這課程,可否給與課程費用價錢?謝謝. Hi Admin / KK,
May I have the date for the course? Thanks. Admin / KK,
Sorry I know that date already, Thanks. yycc,請看電郵 Admin Sir: 我問的問題你未覆,請覆. 報讀有位否? KK / Admin,
May I have the deposit method and detail. Thanks. yycc, 最後1個位, 請看電郵了解報名方法 Hi Admin,
I have transfered the deposit into your account, please check.
B Cheong
Apply for the CDM 9 Class
Hi this is Kelvin.I would like to apply for the CDM-9 class.Re: Apply for the CDM 9 Class
May I ask which Kelvin? Am I know u ? Hi KK / Admin,Could you confirm if my deposit is received? Thanks.
B Cheong bcheong, thx, it is ok Still got seat?I want to join now, hope it is not a bit late...... accphoto, thx! see you there 請問有終極板的機箱照嗎? accphoto, will have sample in 1st lesson.
CDM-X
William,As I will not be able to attend the first class on 25 April, can you please send me a photo of the large case so I can decide if want to go for it.
Thanks.
Eric Hi William,
I'm also not in HK for the first class on 25 April.Pls help to send me the photo and cost of the large case, as well as the detail costs for the other 補品.
Many thks,
Leon Day 0, 1 and 2.
CDM-9X
KK Sir,When will be the next session for above course? I have completed most work but like to have your final checking prior to connect to AC.
Eric (hifi301)
Re: CDM-9X
More photo http://hififever.com/forum/files/thumbs/t_sany0249__medium__116.jpgMETRONOME-T1 :P As the coming weekend will be Mother's Day, I think most of us will not be available on either May 10 or 11.
How about the last lesson on May 17 (Sat)? 加堂安排
19/5/2008 (mon) - 7:30pm-10:30pm
25/5/2008 (sun) - 10:30am - 7:00pm
如未完成的請抽時間出席
CDM-9X
Hello William,Is the big case still available? If yes, I want to take one. Let me know.
Thanks
Eric 因下星期一有1整天假期, 現改為
12/5/2008 (mon) - 11:00am-10:00pm
25/5/2008 (sun) - 11:00am - 6:00pm
如未完成的請抽時間出席 Eric, big case will have next stock available soon, i will reserve one for you.
補堂安排
Admin,Sorry, it is very difficult to me to be free on Sunday and Holiday. I have to celebrate Mother Day with my family on 12/05/08 and I have to go to Church every Sunday. Do you have any other option?
明 Hi KK Sir,
Can you send me the schematic of the CDM9 for trouble shooting?
I had completed the regulator portion and connected the CDM9 loader all work normal. BUT !!!!! NO SOUND !!!!!! output :cry:
Regards,
Patrick
Re: 補堂安排
It is difficult to teacher to reserve his time on holiday too.For DIY, no problem la. Patrick,
Please short JP303.
I believe this point is the major problem.
KK.
Hi KK Sir,
Can you send me the schematic of the CDM9 for trouble shooting?
I had completed the regulator portion and connected the CDM9 loader all work normal. BUT !!!!! NO SOUND !!!!!! output :cry:
Regards,
Patrick