特別課程召集 - CDM-X CD 轉盤製作班 (只限CD理論/DAC課程學員) - 已完結
FULL HOUSE!!!特別課程 - CDM-X CD 轉盤製作班 (只限CD理論/DAC課程學員)
已確認報名者 (如已正式報名和交款者不在列表中請電郵給我們(admin@hififever.com) :
sam_sam (已付定金)
hifi301 (已付定金)
Patrick5 * 2 (到付)
chc51 (已付定金)
Leon(已付定金)
AP (已付定金)
modi (已付定金)
muka (已付定金)
tommy2047 (已付定金)
bcheong (已付定金)
MB (到付)
q
bbleung (到付)
jastudio (到付)
accphoto (到付)
為了迎合大家需求, HiFi Fever 從2008年開始會以召集型式開設工作坊, 砌機課程等等. 最先達到最少報名人數要求的便先行開班! 大家留名時亦可說出自己的特別要求, 我們會儘量配合!
1. CDM-X loader
2. 入門版 / 終極版
3. 終極版可選True16/24 bits out, 44.1Khz, 48kHz, 96kHz, 176.4kHz & 192lHz output
4. 用家可用這高階輸出接至閣下已有的192khZ的 DAC 如 AV Amp, Wadia etc. 很多用家封印了具192khZ 的解碼能力多時
5. 亦可一試44.1/16 Re-clock 輸出
6. 非一般CD Transport可及
名額: 每班最少8名最多15名
CD理論/DAC課程學員請留意電郵 請問 DAC 原理和製作班的TDA1451A 是否用不到 44.1kHz 以上的 Sample Rate 呢? 如果可以我都想砌埋這部 Transport。 AP,
You can use 176.4KHz / 16bit mode.
We have DIP-Switch setting for this.
Available mode
44.1KHz, 48KHz, 96KHz, 176.4KHz, 192KHz
16bit, 18bit, 20bit, 24bit.
Total 20 combination !!!
KK.Ho I am interested.Please inform me when will the course start and the cost. what kind of cd transport u will use in the course? JAS,
Our firmware can be suit for CDM3,4,9,12, Pro2 DSA bus.
We use CDM-9 or CD-PRO2 in this course.
Perfer CDM-9 because the sound quality......
KK.Ho
CDM-X CD
Interested and please count me in.Eric Hi William,
The budget is a concern for me because I would listen LP than to CD.
Thanks.
Regards,
Samuel JAS,
Our firmware can be suit for CDM3,4,9,12, Pro2 DSA bus.
We use CDM-9 or CD-PRO2 in this course.
Perfer CDM-9 because the sound quality......
KK.Ho
CDM-9 is better than CD pro 2?but i see many hi-end transport use CD pro 2... :roll: We have both CDPRO2,CDM9, 3, 4, 12 on hand for written the SW.
Also, up-sampling function will available.
Our CD transport course 需要銲錫電子零件, DIY ma....
Not a simple Plug and Play course
Alot of theory and up-sampling theory(FFT, Z-Transform) will be teach.
KK.HO 嘩！殺死人=D>
期待！期待！ [-o< Does this mean diy a CD player?? YES.
1. The CDM-X loader is pre-assemble, not recommend for Diyer begineer to assemble it, include the SERVO board, alot of testing needed by equipment after finishing.
2. Power supply board + Digital output board + Up-sampling are in same PCB. Diyer are need to assemble this board by using difference kind of compoennts.
3. Front panel : VFD and LCD are available by adding display off function to get the better sound quality.
4. There are 2 kind of chassics is available.
PS : The upsampling function is selling together with the power supply board and will not sold seperately. Which adding alot of extra function with the MCU.
KK.Ho Thks KK.I'm a newbie in DIY and just started to register some courses at here.Only have some soldering skills on electronic toys many years ago (when I was young... :-)) Will this DIY course too complicate for a beginner like me? Leon,
It should be OK for you.
For this course, student who need to solder a QFP package IC (Up-sampling IC) on PCB.
For normal compoennts such as R,C,L, we have teacher will teach you. Sure you need to learn some basic skill (will provided in the course) to learn the colour code, the direction of diodies & capacitors.
Also, you need to learn and do how to make a floor planning and assemble the metal case, you need to drill some of the holes.
PS : Our course is not a plug and play.
It is a real DIY course.
KK.Ho 我報名！ KK sir,
I am wondering how much will such complete kit cost?
Jason
我報名！
hi k.k.ho請問 DAC 原理和製作班的TDA1451A 是否用到 ,如果可以我都想砌埋這部 Transport。價錢如何？
johnny chang Tks KK Sir.Pls count me too.BTW, I'll not be in HK during Apr 15-30 2008.Hope the course does not fall within this period as I'm really very interesting in this one... :-)I'd already missed the DAC course la... :-(
Can we have an idea on the price ranges of the standard and hi-end version first? Just 3 more questions:
1) Can it be made as a top-loading one?
2) I only have a Li-Te DAC-AH DAC.Can it be used with this CD transport?Or, those in the DAC course are much better combination with this one?
3) How does it compare with Shanling's CD300?
Many thks,
Leon
Re: 我報名！
Jas,We will release the price at MARCH.
入門版 / 終極版
TDA1541A is a DAC. And we full class la. I will ask Admin to check more seat if you are interest.
KK. Leon,
I will promise you to keep one seat for you.
We will planning FULL course for
CD theory(with mod) + Transport + Up-sampling + DAC + Tube output.
5 course together.
Ans your question below:
1. It is top load plus. (Secret)
2. 終極版可選True16/24 bits out, 44.1Khz, 48kHz, 96kHz, 176.4kHz & 192KHz output , 用家可用這高階輸出接至閣下已有的192khZ的 DAC 如 AV Amp, Wadia etc. 很多用家封印了具192khZ 的解碼能力多時
3. I don't have CD300.
KK.HO Great!I don't need to wait for the next separate DAC and tube output courses la... :D
Better to include the pre-amp and speaker courses and it will be a perfect 一條龍 hi-fi course... :twisted::twisted:
... well, just joking... that will be too intensive :!::!: CDM9的親密照及影像，版權屬Hififever所有 CDM9的親密照及影像，版權屬Hififever所有 CDM9的親密照及影像，版權屬Hififever所有 Copyright by Hififever DSA bus still have bug, debug now.
And embedded the 2'nd MCU into same MCU for up-sampling.
I promise the final version is OK soon ga la Wa!小沢圓 & GT5 Prologue as background!KK Sir must have started modding PS3 la! Also have LiLi Chan CD PRO 2 VS CDM 9 VS CDM12.1 What is the sound quality compare with Pro2 VS CDM9 ? 看價錢!我都想參加。另外, KK, 我的 1541 DAC 加多個 module 就唔 work, 要 set jumper 嗎？ KK,
I would like to join also.
Bcheong Hi KK,
I would like to join ...
Is the transport including a XLR AES/EBU digital output???
Ck Yes, it is equip with this.
We have upgrade daugther board for 7x4 config.
32KHz, 44.1KHz,48KHz, 88.2KHz, 96KHz, 172.4KHz, 192KHz
16bit, 18bit,20bit,24bit.
2 differential IIS or 2 invididual IIS, 3 X SPDIF out, output at same time.
5 input : IIS, IIS, SPDIF x 3
It is not a simple Plug'n play toys.
Decode two difference IIS and output in matrix mode.
Decode the IIS signal and output the differential IIS signal to 2 IIS port.
Diyer simple connect 2 DAC to form a 4X DAC mode. (48bit resoluton / channel)
KK.
如果想知道CDM9 VS CD PRO2 結果請留意本站, 吾好心急落注,已免 一失足成千古恨, 上緊解碼器班朋友已"先睹為快"
:roll::roll::roll:
Please contact admin to arrange the time for CDM9 VS CD-PRO2.
Super Clock demo
Upsampling DSP demo. (Same decode engine in Yamaha DSP-Z11) Pls count me if there is any demo session available.... thx
CMDX vs PRO2 Session
Please count me in for the demo session on 21 March. I am also interested in t he demo session Hi KK / William, I would like to join the demo session on 21/3.Thanks. Please count me in ....Thanks ^=^ i like to join the course. look forward to seeing the details Pure Digital Amplifier.
Digital IN, Digital processing, SRC include.
Demo at this Friday with CDM-9.
CDM-X
KK 兄，剛剛下了$500元訂參加這個CDM-9的課程。我比較喜歡"亞加力"的裸體Look，請告訴有否付加費。
借你的remote並不能用在我的Audio Note CDT-2，稍後會交還比William。
請收e-mail有關1541。
Eric Hi KK Sir,
Thanks for the demo session arranged today.Pls reserve me a seat for the CDM-9.For the other upgrade items such as LCD panel, LED light, cap, plugs, ..., do we need to confirm them now or can we confirm them at the 1st session (just don't know whether you need to order these non-default items beforehand)?
Moreover, I'll be out of town during Apr 15-30.Best if the course can be started after this period.
As I'm a DIY newbie, it'll be too intensive for me to construct the pre-amp + power amp + CD transport all in a short period.So I decide to cancel my reservation in the power amp course and focus on this one first.This can help me to get more time to run in the toys one by one each time in order to experience the differences.
Many thks,
Leon 好有興趣報名呢, 請問預計幾錢? 由於此批數量有限,此次課程會先給以前DAC及CD原理班朋友報名,你亦可先結電郵給admin留位
CDM-X VS P2 經已完成
試過比較的朋友可在此暢談感受
註:全部用正版CD比較
K SIR The demo uses the same MCU/digital output/reclock/power supply boards, only the differences are the loader and stabilizers (KK, pls correct me if I'm wrong).
1) CDM-9 + downgraded stabilizer: can only locate the vocal voice, difficult to position other instruments
2) CDPro-2 + default stabilizer: overall resolution improved comparing with 1).However, the vocal voice is weak.
3) CDM-9 + default stabliizer: compared with 1), the resolution had been improved quite a lot.Positioning of both vocal and instruments clearly.
As only vocal music is tested using the 3 setups, personally, I prefer 3) if compared with 1) and 2) directly.
As the kit can allow us to interchange CDM-9 and CDPro-2 with little changes and no need to change other sub-systems, I think this can provide us some flexibilities to adjust or fine-tune our own music listening experience when we use this CD transport to fit into our own hifi system at a later stage.
Leon KK, I have a crazy thought.Is it technically feasible to implement both CD loaders with the other sub-systems in a box by adding a switching mechanism to switch all the signal/power cables from CDM-9 to/from CDPro-2 (just like to have a double CD loader player) without affecting the sound base?Of course, we can use only 1 loader each time.If this is possible, we can use the strength of each loader to listen to different kind of music just in 1 box!
Am I too crazy!?I'm absolute green on electronic area and only think from an user's point of view.